How To Install Lori Single Cylinder Deadbolt | Mr. Locksmith White Rock

How To Install Lori Single Cylinder Deadbolt | Mr. Locksmith White Rock: Installing a Lori deadbolt. The Lori Deadbolt can be  a little bit confusing, because most deadbolts have the screws on the inside, so it’s pretty easy to figure out how to remove it, its double cylinders are a little different, so most of our Kwikset, Weiser, and Schlage deadbolts is pretty simple. You have a couple of screws, you take it out the traditional way. The Lori Deadbolts have a set screw hidden along the side of the bolt. You will need a 5/16-inch long-shaft Allen wrench to install or remove the set screws.

How To Install a Lori Single Cylinder Deadbolt

Tools to Install Lori Deadbolt

  • Phillips screwdriver
  • 5/16-inch long-shaft Allen wrench
  1. Open the Door
  2. Detach the slide bolt faceplate from the door edge by removing the two flathead screws using a Phillips screwdriver.
  3. Remove the thumb latch assembly from the interior side of the door, if applicable, by removing the two screw bolts on either side of the latch handle, then pulling the assembly horizontally from the door.
  4. Slip the long shaft of a 5/16-inch Allen wrench into the space on either side of the slide bolt to engage in the cylinder set screws and turn the set screw counterclockwise two to three full turns to loosen. Repeat for the set screw on the other side of the slide bolt.
  5. Remove the deadbolt cylinders by turning the cylinders counterclockwise until the cylinder is free of the mortise housing. You can insert the deadbolt’s key into the cylinder for leverage in turning the cylinder. Repeat for the opposite side cylinder in double-keyed models.
  6. Pull the slide bolt assembly from the door edge, then remove the cylinder housing from the door hole.

Lori Single Cylinder Deadbolt

A couple of screws. You can see the screws, you can see how to take it apart. And everything apart. So that’s your traditional single cylinder deadbolt. Now I’ll show you the Lori. They’re made by a ilco, UniCan, kaba, whatever you want to call them this week. It’s not my favorite deadbolt. In the year, you know, 35 years ago, it was a good deadbolt and I’ll show you why, because we could make almost any cylinder fit this. So, and that’s why they’re confusing when you see this on the door. Sometimes they’ll say Lori, other times they’ll say, could be Schlage, could be kaba, could be medical. It could be almost any type of lock. And you’ll see why it’s confusing for Locksmiths and also beginner locksmiths, or just the home, do it yourself or try to take this Lori lock off the door. So this is the ilko Lori, pretty simple. It’s instructions. Now, you’ll see it’s already slightly different than our normal deadbolts. And what the important pieces on this is, it’s the Allen key. You needed a long reach Allen wrench or Allen key. What do you want to call it? The Allen wrench or Allen key is five 64 of an inch. So this is what you need. And this is what’s a real pain in the butt. And it has to be a longer one, the normal. So sometimes your little kits don’t have the reach for it. So that’s the most important thing to the installation of this lock. And we’ll just show you what we got here. Now, this is a single cylinder and it’s pretty basic stuff. What you have here is the housing and it’s pretty easy. It says right on there top, is there an inside and outside? Here’s the confusing part. It has the little set screws and you can’t really see it when you’re trying to take it off. But when we’re putting it in, it’s a little bit different. So to install it, we have the cylinder housing, make sure your set screws are flush. That makes it easier to do the install. Top there, just place it in there, take our dead bolt, basically going to feed it in there. This is the single cylinder deadbolt. So this is what comes in the kit. Now this is what gets a little confusing. These machine screws are for holding the thumb turn on, these ones in the bag here, are for holding the housing to the bolts. So we’ll take these out right now. So there we have, now the bolt is into the housing. So the next step is, we have to change, this is a mortis cam and they have to use the Adams right cam. Take it off, put it in, and make sure, you know, you get the right side down. This will set flush, and that’s another common mistake. People put these in. So again, just tight don’t over crank them. And they have to be flush. So we’ve got the Adam’s right cam on the boarder cylinder. Everything’s good, we got the right key. Okay, everything’s perfect. So the spacer goes on first, then our little springy cover. And what we have to do now, take the outside housing, and what we’re going to do, is we’re going to install it. It’s going to screw in similar to an Adam’s rights storefront. But we’re going to screw the mortar cylinder in here. And again, don’t cross thread it. It’s pretty easy to cross thread. And I take the key out a little bit and gently get it snug. We have the mortar cylinder in the outside. Now I’m going to install the thumb turn on the inside. Other screws. Again, don’t force anything. You’ll cross thread the heck out of everything. So again, just do it snug, double check it, and check this. Now what we have to do to make sure, make sure that’s vertical. Now this is the confusing part. You can take your Allen wrench 564s. It has to be long. Now this is the difficult part for most people. You have to get it right in there, and just sort of wiggle it a little bit, and then you get in the set screw. Right to tighten, and again, snug not crazy, so we know we’re in, pull it out. Try that. Yeah, we obviously didn’t, I think we’re, I got to go in a little bit tighter. Cause see how it’s binding a little bit there, right there. We’re either binding on the, I think we’re binding on the set screws. You’d have to back it off or put it in. So let’s just snug. Now it’s a lot better. So just check by putting your, lock it, take the key out, unlock it, take the key out, one more check on the inside. Now we don’t have to do the set screw there because it’s a single cylinder, and these are held into the housing, these two screws. So we don’t have to set the screw there. The cover plate. Make sure it works. Don’t over-tighten these, if you over-tighten it, you’re going to find the bolt won’t open and close properly. There we go. Pretty simple. The advantage of this lock in the old days, again, I am not a fan of it right now, we run across a lot of them, is I can put any mortar cylinder with the Adam’s right cam in here. So I can put in anything. I can put it in a high security, any mortar cylinder lock, or any brand lock, any brand name will screw into that, and you can key it up to anything. So it’s a very versatile. In the old days it was versatile because we didn’t have too much choice. And now we have so many choices right now. As you know my favorite is the, take the Schlage, the B 660s or the 560s, or even the the end series, the new ones, the 60 ends. I can put the kick cylinder, we call them kicks owners. So it’s a cylinder we can put in. But we’re talking about this lock today. So this is the Lori Kaba. In its day it was versatile, but we run across a lot of these and some customers still have them, and some commercial buildings have boxes of these things. So we’re still installing them. They’re okay, I’m not a fan of them. I find them, if they’re exposed to weather, that little set screw rust up and the inside rust up. Again, not my favorite lock. It’s not that cheap either, but we run across them. So this is the Ilco, Lori, Kaba style deadbolt. It’s mostly called the Lori single cylinder deadbolt. Hope you enjoyed the video. Good luck when you run across these. Okay, have a good day. I hope you enjoyed watching this video. Subscribe to my channel, also visit my website and you can see what online Locksmith training I have for beginners, intermediate and advanced, as well as my covert methods of entry, and my non-destructive methods of entry.

How To Install Lori Single Cylinder Deadbolt

How To Install Lori Single Cylinder Deadbolt

Lori Deadbolt

Mr. Locksmith White Rock: (604) 210-9875

Mr. Locksmith Automotive : (604) 259-7617

How To Install Lori Single Cylinder Deadbolt

How To Install Lori Single Cylinder Deadbolt

About Terry Whin-Yates North Vancouver

温泰瑞 BA (Hons) Criminology 3rd Generation Locksmith 35 Years Experience BC Security License : B4227

温泰瑞
BA (Hons) Criminology
3rd Generation Locksmith
35 Years Experience
BC Security License : B4227

Terry Whin-Yates is the president and SEO of Mr. Locksmith and it. Terry’s father and grandfather taught him how to pick locks. Terry has 35+ year experience as a locksmith and a BA(Hons) degree in Criminology from Simon Fraser University. Today he lives in Vancouver and his children work in the business. Mr. Locksmith has several locksmith franchisees, all of whom are like extensions of the family business.

 

Bike Lock vs Cordless Grinder | Mr. Locksmith™ White Rock

Bike Lock vs Cordless Grinder | Mr. Locksmith™ White Rock

Locksmith Courses and How to Pick Locks: http://mrlocksmithtraining.com/

How to Make Keys to Cars, Automotive Locksmith ONLINE COURSE

Open U Lock with a cordless grinder with a cutting wheel.

Open bike lock with a cordless grinder.

I use a Milwaukee Cordless Grinder with a cutting wheel to open most if not all Bike Locks. Just be careful where the sparks go, avoid flammable or plastics that can burn or pit. Wear Gloves and Safety glasses.


One of the best tools in the whole world is a cordless grinder with a cutting wheel. This saves my butt all the time. I could use a big pair of bolt cutters on this, but sometimes I find, when you use the bolt cutter, you can get a piece flying off and it could break a window or something or hurt somebody. I like this, you just have to be aware of the sparks will wreck your shirt. Also, you cannot be by anything flammable or anything plastic or anything glass. So just be really careful when the sparks shoot off of this thing. Usually, I aim the sparks so they go down, usually, it’s okay. So I am just going to cut off this inexpensive bike lock, I am going to use my cordless grinder. I always like to secure whatever I am cutting. I like to secure with a pair of vise grips. Now, wear your safety glasses, I always wear my gloves, just in case. Now, this is interesting. The battery is just a little tiny efficiency one. It is not big enough, not enough amperage, I guess to run the cordless grinder. So I am going to change my, swap my battery out. It’s the first time doing it with a little one. I just thought, “Oh, let’s give it a try.” Yes, look at that and look at, just sucking up the power on this. So I am going to just swap out the battery with a bigger one. I have heard about some people having some trouble with other tools. I have never had a problem with the drill. This is basically double. This is the bigger one. I have never had a problem using this. This is the first time using that. Let’s just swap it out real quick. Full power. And let’s finish it off. There we go. And remember this is hot hot hot. Don’t touch the ends, be careful you don’t burn off the bike. Yes, I could have picked this. It requires a special pick, it’s not that difficult, but I’m a for-profit locksmith. I am not going to make keys to this, it’s disposable. I think they paid 10 bucks for this. It costed more for the service call to get it off, but we didn’t destroy the bike. So, again, you could pick some of these, you could do whatever. My bottom line is I have to get this done fast and efficient and I just cut it off.

Open U Lock with a cordless grinder with a cutting wheel.

Open bike lock with a cordless grinder.

I use a Milwaukee Cordless Grinder with a cutting wheel to open most if not all Bike Locks. Just be careful where the sparks go, avoid flammable or plastics that can burn or pit. Wear Gloves and Safety glasses.

Mr. Locksmith™

Hope you enjoyed this video, please subscribe and hit the like button, thank you very much. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non-destructive methods of entry.

Certificate in Automotive Locksmithing

Mr. Locksmith™

————————————————————————————————-

Locksmith Courses: http://mrlocksmithtraining.com/

Automotive Locksmith  “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

 

———————————————————————————————————–
Business email: [email protected]

Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230

————————————————————————————————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/

————————————————————————————————-

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

About Terry Whin-Yates

————————————————————————————————-

Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.

————————————————————————————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

Call Mr. Locksmith White Rock (604) 210-9875

 

Bike Lock vs Cordless Grinder Mr. Locksmith

 

 

I Bought the Wrong Inverter | Mr. Locksmith™ White Rock Video

I Bought the Wrong Inverter | Mr. Locksmith™ White Rock Video

 Automotive Locksmith Traning Course Sign up Now!

“How to Become an Automotive Locksmith” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

I bought the wrong inverter. I wanted to be able to put it in my service truck or my camper or whatever, but this is for my service truck. So I wanted to be able to take 12 volts from the battery and be able to plug in 110 key machines. Now, in theory, this is a great deal. This was on sale for like $100, it is a 12 volt to 110 volt Modified sine wave 2,000-watt inverter, it’s more than I need, it’s going be perfect for my key machines. So I thought. I’m not an expert on inverters but the first thing I learned is there are actually two types: Modified Sine Wave and Pure Sine Wave

That will be great for the key machines. However, this is a modified sine and what I need is the pure or the regular Sine Wave. So the problem you’ll run across between the regular wave which is considered clean, and this modified one which is squared off is the modified wave is not good for if you are running computers. So it’s not as clean. That’s why they’re really inexpensive. It is going to cost me two, three, four times more money for getting the proper one I want. And the reason I am not going to use this one, it will do the trick for the basic duplicator key machines, however my Miracle A9S and also my ITL are code machines and they run circuit boards, they are like mini little computers on there. I am going to have to take it back now, it’s really really good but it’s a Modified Wave and I can’t use this on my computer key machines. I’m risking problems. I could be wrong, I am not going to take a chance, I will go out there and get the proper one for my locksmith service truck.


Automotive Locksmith Traning Course Sign up Now!

“How to Become an Automotive Locksmith” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

I hope you enjoyed this video, please subscribe and hit the like button, thank you very much. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non-destructive methods of entry.

Mr. Locksmith™

————————————————————————————————-

Locksmith Courses: http://mrlocksmithtraining.com/

Automotive Locksmith  “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

———————————————————————————————————–
Business email: [email protected]

Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230

————————————————————————————————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/

————————————————————————————————-

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

About Terry Whin-Yates

————————————————————————————————-

Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.

————————————————————————————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

Call Mr. Locksmith White Rock (604) 210-9875

I Bought the Wrong Inverter

IFAK Individual First Aid Kit For Locksmiths | Mr. Locksmith White Rock

IFAK Individual First Aid Kit For Locksmiths | Mr. Locksmith White Rock

For further info and to sign up for my new On-LIne “How to Pick Locks” Course go to http://mrlocksmithtraining.com/

Recon Medical Tourniquet – (Black) GEN 3 Mil-Spec Kevlar Metal Windlass Aluminum First Aid Tactical Swat Medic Pre-Hospital Life Saving Hemorrhage Control Registration Card, AOS: https://amzn.to/2n0q0R6

Everlit Emergency Survival Trauma Kit with Tourniquet 36″ Splint, Military Combat Tactical IFAK for First Aid Response, Critical Wounds, Gun Shots, Blow Out, Severe Bleeding Control: https://amzn.to/2kXpcMf

IFAK Trauma Kit: Individual First Aid Kit.


First aid kit for locksmiths. We are in our service vehicles all day long. It’s smart to have a first aid kit in your service truck. Also, you should have one in the house and you should have one in your personal car.

Everybody has their personal choices for a First Aid Kit and this is mine. I have a Smith and Weston folding knife with a glass breaker and seat belt cutter. I like having a black marker so you can write the person’s name on their forehead or time a tourniquet was applied, etc.

Some people like a couple of tourniquets in their kit. Also, I have my boo-boo kit, band-aids, butterfly straps, butterfly bandaids, alcohol wipes, iodine wipes, antibiotics, Tylenol, Advil, some stomach medicine, pair of gloves, scissors, tweezers, forceps, space blanket, Israeli bandages, quick clots, gauze, triangular bandage and more.

We are lucky in North America and most Western societies, we have the Good Samaritan Act, as long as you’re trying to help, in most cases you are not going to get sued, we are not doctors, we’re just trying to help.

Take a First Aid Course, methods, procedures and products are getting better every day to help people.

Please Subscribe to my Channel.

For further info and to sign up for my new On-LIne “How to Pick Locks” Course go to http://mrlocksmithtraining.com/

For further info and to sign up for my new On-LIne “How to Pick Locks” Course go to http://mrlocksmithtraining.com/

Mr. Locksmith™

About Terry Whin-Yates

I hope you enjoyed this video, please subscribe and hit the like button, thank you very much. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non-destructive methods of entry.

I hope you enjoyed this video, please subscribe and hit the like button, thank you very much. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non-destructive methods of entry.

Mr. Locksmith™

————————————————————————————————-

Locksmith Courses: http://mrlocksmithtraining.com/

Automotive Locksmith  “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

 

———————————————————————————————————–
Business email: [email protected]

Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230

————————————————————————————————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/

————————————————————————————————-

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

About Terry Whin-Yates

————————————————————————————————-

Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.

————————————————————————————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

Call Mr. Locksmith White Rock (604) 210-9875

 

IFAK Individual First Aid Kit

CoronaVirus Business Opportunities for Locksmiths | Mr. Locksmith White Rock

CoronaVirus Business Opportunities for Locksmiths | Mr. Locksmith White Rock

Locksmith Courses and How to Pick Locks: http://mrlocksmithtraining.com/

How to Make Keys to Cars, Automotive ONLINE COURSE

The coronavirus is spreading all over the world. I did a video back at the beginning of January 2020, I said this is going to hit us hard, locksmiths, be prepared. Now it’s here, they’re shutting down borders, they’re stopping flights. It is affecting business. In some areas, we’ve had big drops in our business. But now we’re seeing an increase in other parts of the businesses and this is an opportunity for locksmiths. Public events are shutting down but now they want to restrict more access and they’re rekeying the locks to stop people from going into other areas. Seniors homes, they now have to restrict access because of the coronavirus and they are rekeying all their exterior doors. So there are huge opportunities.


Businesses are more vulnerable. We just had a bunch of churches got broken into because they’re not as busy with shutting down community events so they’re quiet and the burglars can’t bust into the homes because everybody’s home so now they’re breaking into churches. I’m just gonna leave right now, I’m going to a church and we’re gonna have to secure it down.

Locksmiths, you can do a couple of things. You can cocoon up and just ride it out or you can go out there and help secure your community and make some money too.

They are shutting down borders, shutting down air flights but is an opportunity, locksmiths. Go out there, be prepared, do some basic stuff call your clients, give them some security ideas. They are fearful, they need some expert guidance.

Hope you enjoyed this video, please subscribe and hit the like button, thank you very much. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non-destructive methods of entry.

Certificate in Automotive Locksmithing

Mr. Locksmith™

————————————————————————————————-

Locksmith Courses: http://mrlocksmithtraining.com/

Automotive Locksmith  “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

———————————————————————————————————–
Business email: [email protected]

Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230

————————————————————————————————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/

————————————————————————————————-

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

About Terry Whin-Yates

————————————————————————————————-

Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.

————————————————————————————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

Call Mr. Locksmith White Rock (604) 210-9875

CoronaVirus Business Opportunities for Locksmiths White Rock

Liftmaster: How to Change Garage Door Remote Battery White Rock (604) 210-9875

Liftmaster: How to Change Garage Door Remote Battery White Rock
(604) 210-9875 | Mr. Locksmith Garage Door Repair White Rock

For further information go to http://mrlocksmithgaragedoor.com/

Replace Batteries In Universal Garage Door Remote

  1. Pry open the case.
  2. Remove the old battery. Dispose of old batteries properly.
  3. Insert the replacement battery positive side up. Replace the battery with only 3V CR2032 coin cell batteries.
  4. Replace the cover.

Need a new garage door remote? Garage door malfunctioning? Or looking to upgrade your garage door opener? Mr. Locksmith Garage Door & Repair is your 24 hour garage door repair and locksmith service. We service all residential garage doors such as Craftsman, Liftmaster and more. Need a new garage door cable? New garage door spring? Mr. Locksmith Garage Door & Repair  White Rock can help.

Are your garage door hinges worn out? Need a new tension spring? We’ll replace them for you! Need garage door framing? We can do that too!

Are you tired of carrying around that bulky garage door remote? We can program a key fob universal remote for you for your keychain.

We have garage door parts in stock from every major manufacturer and can service your garage door right away.

In the winter, drafty garage doors can be a pain. We’ll weatherstrip your garage door for you.

Call Mr. Locksmith Garage Door Repair White Rock (604) 210-9875

Garage Door Remote and Batteries:

Energizer CR2032 Batteries, 3V Lithium Coin Cell 2032 Garage Battery, (6 Count) https://amzn.to/2us1CvX

Chamberlain Group KLIK3U-BK Clicker Universal 2-Button Garage Door Opener Remote with Visor Clip, Black https://amzn.to/2Sje9ee

Chamberlain/LiftMaster/Craftsman 940EV-P2 Garage Door Opener Keyless Entry Keypad, Security +2.0 Compatible https://amzn.to/2w7OiNE

Chamberlain Group Chamberlain B970 Smartphone-Controlled Ultra-Quiet & Strong Belt Drive Garage Door Opener with Battery Backup and MAX Lifting Power, Blue https://amzn.to/2SfOHGf

Are your garage door hinges worn out? Need a new tension spring? We’ll replace them for you! Need garage door framing? We can do that too!

Are you tired of carrying around that bulky garage door remote? We can program a key fob universal remote for you for your keychain.

We have garage door parts in stock from every major manufacturer and can service your garage door right away.

In the winter, drafty garage doors can be a pain. We will weatherstrip your garage door for you.

Hope you enjoyed this video, please subscribe and hit the like button, thank you very much. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non-destructive methods of entry.

Mr. Locksmith Garage Door Repair & Installation (604) 210-9875

Mr. Locksmith™
————————————————————————————————-

Locksmith Courses: http://mrlocksmithtraining.com/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

COMING SOON: ONLINE COURSE “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

————————-
Business email: [email protected]
Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230
————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/
——————
Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

http://mrlocksmithtraining.com/about-terry-whin-yates/
—————–
Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.
————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

Liftmaster: How to Change Garage Door Remote Battery

 

Top 3 Screwdrivers for Locksmiths | Mr. Locksmith Video

Top 3 Screwdrivers for Locksmiths | Mr. Locksmith Video

For further information go to Mr. Locksmith White Rock

My top 3 Screwdrivers

Let us talk about three of the must have tools you have to have for your locksmith kit. Every one locksmith must have these three tools: Megapro set, Hex set, and the Tamperproof kit.

The Megapro set

The Megapro set – this is the original and inside it it has the flatheads, the Robinsons, the Phillips and some torques. That is absolutely fantastic. It’s a go-to tool. It’s always there, it’s got the tools.

The next one on my kit – the Hex set.

The Hex set

The Hex set – It’s got all the basic or the most popular sizes in it. You have to have this  screwdriver if you’re a locksmith because so many times you’ve misplaced your Allen keys. This is, a must have, fantastic tool. Especially we’re getting a lot of European made locks out there. you still need complete Allen key sets, but you can just grab this and 90% of the time, if not more, this will do the trick.

The other one is the Tamperproof kit.

The Tamperproof set

Tamperproof kit – This is the MegaPro. What it is, it’s for taking out the tamper-proof screws. It’s got all the most popular tamperproofs and torques an dthe flatheads with the holes inside. It is really, really cool.

So these are the three must have tools for everybody. You gotta have these in your locksmith kit. The original MegaPro, it’s got the most popular screws you’re going to run across every single day. The Hex, because you’re running across a lot of these in locks now, more and more all the time, this will probably, used 90% of the time, you’ll still need an Allen key set but it does the trick. And the Tamperproof. This will do for taking out those one way screws that are flatheads and it’s got the special bit for taking out the one way flatheads. It’s got the hex with the hole in it and the torques with the hole in it. Must have tools for the locksmith. For a beginner or a pro, this is a lifesaver. Have a good day. I hope you enjoyed watching this video.

Mr. Locksmith White Rock

White Rock Locksmith Main: (604) 210-9875

Downtown Vancouver Locksmith: (604) 262-1907

Downtown Vancouver Keystore: (604) 669-8008

Mr. Locksmith Automotive Locksmith: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities

Locksmith Guide to Motorcycles | Mr. Locksmith Training Blog

Locksmith Guide to Motorcycles | Mr. Locksmith Training Blog

For further information go to Mr. Locksmith White Rock

Locksmith Guide to Motorcycles

One of my favorite books for making keys to motorcycles is the Locksmith Guide to Motorcycles. The National Locksmith is selling it. Guide to Motorcycles, seven volumes. Get them all. Love it. It’s a great book.

Covering a wide range of service procedures, you’ll know everything a locksmith needs to know about each cycle. Plus, you’ll get step by step photographs and instructions. If you have ever been frustrated by cycles made by the following manufacturers:

– Neiman
– Suzuki
– Triumph
– Yamaha

– BMW
– Buell
– Harley-Davidson
– Honda
– Kawasaki
– Moto Guzzi

Please subscribe to my channel.

If you need an extra Car, Truck or Motorcycle key or a Motorcycle Locksmith call Randy at Mr. Locksmith White Rock (604) 259-2522 or email [email protected]

Motorcyclists in Canada have as much need of a good, reliable motorcycle locksmith as car owners. You’ve got a vehicle, a bike, that gets you from here to there, and sometimes it can’t do its job. Whether that’s because of a broken ignition key, lost keys, or damaged keys, a professional motorcycle locksmith can resolve your problem and get you back on the road. If you’re in need of excellent and professional motorcycle locksmith services, Mr. Locksmith Automotive is a top choice.

Whether you ride your motorcycle to work every day or just for fun at the weekend, a lost or broken key is bad news. And that’s when Locksmith Guide to Motorcycles gets handy. Hopefully, you have a spare, but there’s no need to worry if you don’t. Mr. Locksmith Automotive White Rock can provide you with a working replacement in next to no time. All you need to do is call us. Our mobile motorcycle locksmith service offers motorcycle key duplication, even if you don’t have the original key to hand. We can utilize the manufacturer’s code to professionally craft a new key with our specialized equipment and computerized key code machines.

In addition to replacing lost or broken motorcycle keys, we also offer professional repair services for motorcycle locks. You need a heavy duty lock to protect your bike when you’re away from it. If you lose or break the key to that lock, we’ll take care of it.

Our comprehensive motorcycle locksmith Concord services include:

  • Motorcycle key duplication
  • Lost key replacement
  • Broken ignition key extraction
  • Broken lock key extraction
  • Lock rekeying
  • Lock repair
  • Lock replacement

Our key and lock replacement service is suited to most makes and models of motorcycle, including: Harley-Davidson (we specialize in all Harley-Davidson Motorcycles, locks, keys and Fobs), Honda, Yamaha, Suzuki, Ducati and many more.

Mr. Locksmith White Rock

White Rock Locksmith Main: (604) 210-9875

Downtown Vancouver Locksmith: (604) 262-1907

Downtown Vancouver Keystore: (604) 669-8008

Mr. Locksmith Automotive: and Motorcycle Locksmith (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

 

 

MVP PRO Auto Key Programmer Review | Mr. Locksmith Video

Automotive Locksmith MVP PRO Auto Key Programmer Review | Mr. Locksmith Video

For further information go to www.mrlocksmith.com

My daily Auto Key Programmer is the HotWire and the MVP Pro. I am on the unlimited token plan for both programmers. For the past 5+ years, I have been purchasing and testing “Offshore Auto Key Programmers.”

I have several Off Shore MVP clones. The price was so low, we keep on testing to see if any Off Shore Key Programmer could replace our existing programmers.

The MVP Clones are poorly made and no consistency or reliability with the software.

One Off Shore clone will program Ford and Chrysler but not Honda. Another identical clone will do Honda but not some Fords.
Another clone may work on a Nissan, but no one unit will do everything. It’s just been a zero.

So we kept on buying these, kept on testing them. Our dongles would break. The units would break. They’d fall apart. The software was inconsistent.

However, we found one clone that consistently worked well with Honda reflashes, specifically the 1998-2002 Honda Preludes.

In the early day we were just trying to save tokens, and really did we save any money? No, the clones were not good. There’s no consistency.

But again, if you don’t try, you don’t know. And there are some good units out there that the Chinese are coming out with now that are making some of the good stuff look bad.

Some of the new offshore auto key programmers they are using their own software, their own designs, and they are not clones or scammer units. Some of the Off Shore Key Programmers actually seem to be getting there.

Well, they’re coming out with nice updates on them, so they are becoming consistent.

The thing is with everything, you could have an Offshore made, really good programmer, and now they have counterfeit units of that that are total garbage.

So why are some of these Auto Key Programmers $300 and the other unit’s $50? The $50 unit is a total clone and it’s a total piece of garbage. How do you know? You don’t. That’s the big problem.

One way to find out is if you read the automotive forums.

Talk to other Locksmiths and view our videos.

The various plugins quality was all over the map. Some very good forums on Facebook, KeyPro website, ClearStar, etc.

So far, again, we’ve talked about this before, our go-to units are the MVP Pro and Hotwire.

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

 

So again, stay tuned for our other videos in the series. This is the MVP Pro. Thank you. I hope you enjoyed watching this video.

Subscribe to my channel.

If you need an extra Car, Truck or Motorcycle key call Randy at Mr. Locksmith Automotive (604) 259-7617 or email [email protected]

Mr. Locksmith White Rock

White Rock Locksmith Main: (604) 210-9875

Downtown Vancouver Locksmith: (604) 262-1907

Downtown Vancouver Keystore: (604) 669-8008

Mr. Locksmith Automotive Locksmith: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities and automotive locksmith near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

 

 

My Favourite Veto Pro Pac for Tools | Mr. Locksmith Blog

My Favourite Veto Pro Pac for Tools | Mr. Locksmith Blog

For further information go to http://mrlocksmith.com/

 

I now have four (4) Veto Pro Pac Tool bags for my locksmith tools.

Hi, I’m Terry. As a locksmith, I’m always trying to figure out how to carry my tools, how to have them convenient, what to do. I’ve tried everything over the years. As you get older, you also, now we’re looking at cart options; how am I gonna drag my tools around; what am I going to do? One thing that’s outlasted everything I’ve ever bought, is the Veto Pro Pac. They have an entire line, and I love they have the little ones; they have the larger kits. I’ve been using this for years.

 

 

I have other kits I use, and I tried Pelican cases, Pelican tool cases, which I really like, but these Vetos; I’ve also tried the stuff you buy at the various hardware stores; they’re selling packs and totes and all sorts of stuff. What lasts the best, the Veto Po Pac, Pro Pac.

They last forever. I would still order extra one of these shoulder straps, just ’cause it’s built so well; it lasts forever. It never wears out, never breaks. These things last forever. This is a great, this one here, this is probably like three years old, and look at it; it is like brand new.

The only disadvantage is, they’re empty, they’re quite heavy, and this is exposed to the weather when I’m sort of running in and out of job sites. It’s heavy, heavy duty; it’s expensive, but they last forever. My other bags I’ve bought, you know, between 50 and 70 dollars. They last me a year, if that, and they get pretty worn out, pretty quick.

These things last forever, and this is my enclosed one. This is just sort of one in the back of my, not my service truck, I just threw some tools in it. It just holds everything, everything in one spot. You can throw all your stuff in, you can throw your cordless drill, your picks, everything. I’ve been lookin’ at their backpack right now, for our Key Store, to have our guys run out and just do some quick little locked out of filing cabinets, so I’m looking at the Veto Pro backpack.

I will check out Veto Pro Pack website and see if they have something on wheels because they make such a fantastic system. What I really need is something on wheels. I put these right now on a little cart I have for out of the service truck, onto, up the elevator, because we’re downtown so lots of elevators and stairs, and I don’t wanna go back to the truck to get something

I forgot, so I throw these on a cart. I love this for my installation kit. This is just something just quick, easy, in the back of my personal vehicle, so if I get a lockout and I’m on the road, or I have to help somebody, I have my own personal tools with me. Again, great stuff, expensive, but they last forever, and fantastic, really, really good; I highly recommend it.

I hope you enjoyed watching this video. Subscribe to my channel.

 

 

Mr. Locksmith Veto Pro Pack

 

 

Mr. Locksmith Veto Pro Pack

 

 

Call Mr. Locksmith for further information http://www.mrlocksmith.com/

or email: [email protected]

Mr. Locksmith Vancouver

Vancouver Locksmith Main: (604) 239-0882

Downtown Vancouver Locksmith: (604) 262-1907

Downtown Vancouver Keystore: (604) 669-8008

Mr. Locksmith Automotive: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

 

Mr. Locksmith Veto Pro Pac for Tools