Bike Lock vs Cordless Grinder | Mr. Locksmith™ White Rock

Bike Lock vs Cordless Grinder | Mr. Locksmith™ White Rock

Locksmith Courses and How to Pick Locks: http://mrlocksmithtraining.com/

How to Make Keys to Cars, Automotive Locksmith ONLINE COURSE

Open U Lock with a cordless grinder with a cutting wheel.

Open bike lock with a cordless grinder.

I use a Milwaukee Cordless Grinder with a cutting wheel to open most if not all Bike Locks. Just be careful where the sparks go, avoid flammable or plastics that can burn or pit. Wear Gloves and Safety glasses.


One of the best tools in the whole world is a cordless grinder with a cutting wheel. This saves my butt all the time. I could use a big pair of bolt cutters on this, but sometimes I find, when you use the bolt cutter, you can get a piece flying off and it could break a window or something or hurt somebody. I like this, you just have to be aware of the sparks will wreck your shirt. Also, you cannot be by anything flammable or anything plastic or anything glass. So just be really careful when the sparks shoot off of this thing. Usually, I aim the sparks so they go down, usually, it’s okay. So I am just going to cut off this inexpensive bike lock, I am going to use my cordless grinder. I always like to secure whatever I am cutting. I like to secure with a pair of vise grips. Now, wear your safety glasses, I always wear my gloves, just in case. Now, this is interesting. The battery is just a little tiny efficiency one. It is not big enough, not enough amperage, I guess to run the cordless grinder. So I am going to change my, swap my battery out. It’s the first time doing it with a little one. I just thought, “Oh, let’s give it a try.” Yes, look at that and look at, just sucking up the power on this. So I am going to just swap out the battery with a bigger one. I have heard about some people having some trouble with other tools. I have never had a problem with the drill. This is basically double. This is the bigger one. I have never had a problem using this. This is the first time using that. Let’s just swap it out real quick. Full power. And let’s finish it off. There we go. And remember this is hot hot hot. Don’t touch the ends, be careful you don’t burn off the bike. Yes, I could have picked this. It requires a special pick, it’s not that difficult, but I’m a for-profit locksmith. I am not going to make keys to this, it’s disposable. I think they paid 10 bucks for this. It costed more for the service call to get it off, but we didn’t destroy the bike. So, again, you could pick some of these, you could do whatever. My bottom line is I have to get this done fast and efficient and I just cut it off.

Open U Lock with a cordless grinder with a cutting wheel.

Open bike lock with a cordless grinder.

I use a Milwaukee Cordless Grinder with a cutting wheel to open most if not all Bike Locks. Just be careful where the sparks go, avoid flammable or plastics that can burn or pit. Wear Gloves and Safety glasses.

Mr. Locksmith™

Hope you enjoyed this video, please subscribe and hit the like button, thank you very much. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non-destructive methods of entry.

Certificate in Automotive Locksmithing

Mr. Locksmith™

————————————————————————————————-

Locksmith Courses: http://mrlocksmithtraining.com/

Automotive Locksmith  “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

 

———————————————————————————————————–
Business email: [email protected]

Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230

————————————————————————————————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/

————————————————————————————————-

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

About Terry Whin-Yates

————————————————————————————————-

Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.

————————————————————————————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

Call Mr. Locksmith White Rock (604) 210-9875

 

Bike Lock vs Cordless Grinder Mr. Locksmith

 

 

Robson St Vancouver BC Boarded up to Prevent Looting | Mr. Locksmith™

Robson St Vancouver BC Boarded up to Prevent Looting | Mr Locksmith (604)-262-1907

https://mrlocksmithvancouver.com/

The Pandemic has closed down most Retail Stores and Businesses in Vancouver and the World.

The larger Chains quickly boarded their storefronts with Plywood.

Other businesses are starting board up windows to guard against crime after closing as a result of the COVID-19 pandemic.

The Vancouver Police Department says commercial break-ins have increased and patrols have been beefed up in hardest-hit areas.


In a March 26 press release, the VPD said some criminals are trying to take advantage of the situation and it’s “taking significant measures to combat property crime while local and provincial measures are in place to address the spread of COVID-19.”

To increase security, the VPD advises Vancouver businesses to:

Move merchandise away from windows and out of view or remove it from the retail space altogether

Use window shutters to minimize damage and reduce visibility

Upgrade locks

Increase outdoor lighting levels to ensure the space around your business is visible and well-lit

Aside from the VPD increasing patrols in some areas, property crime detectives are also running several investigative projects to target known offenders.

Break-ins quadruple in Vancouver as stores shut for COVID-19 and the crime stats are increasing.

Mr. Locksmith (604)-262-1907

Mr. Locksmith™

Robson Street Vancouver Nike Boarded Against Looters| Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters| Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith

Closed for COVID-19 Robson Street Vancouver Boarded Against Looters | Mr Locksmith

————————————————————————————————-

Locksmith Courses: http://mrlocksmithtraining.com/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

COMING SOON: ONLINE COURSE “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

————————-
Business email: [email protected]
Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230
————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/
——————
Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

http://mrlocksmithtraining.com/about-terry-whin-yates/
—————–
Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.
————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

Robson St Vancouver BC Boarded up to Prevent Looting | Mr. Locksmith

Become an Automotive Locksmith | Mr. Locksmith™ Training

Become an Automotive Locksmith | Mr Locksmith Training: Online Locksmith Training

Automotive Locksmith Course Sign Up Now: http://mrlocksmithtraining.com/

Welcome back, this is “How to become an Automotive Locksmith.”

I have been making keys to cars the day I got my driver’s license, at 16 years old and one day. I got my driver’s license and the first thing I did was load up the trunk of the car with tools so I could go out there and make keys to cars. I was opening cars like crazy, I’m only 16, we had a family locksmith business, so I’m opening up cars. It was so easy, back in those days, a slim jim, a flat piece of band steel we made, and a coat hanger. And I had a chrome-plated coat hanger because people got upset if I took their coat hanger and opened up their door, with the button. I made a little shepherd’s hook and opened it, they got mad and they didn’t want to pay, but if I took out this shiny, chrome coat hanger and opened up their door, they just thought I was a genius. I’ve been doing this a long time, been making keys to cars, and actually, it was very easy, when I was a kid, and teenager, and then into my 20s, cars were a mechanical key. If you had the keys, a lot of the automotive had the key codes, it was a fun business and not too many people did it. Which brings us to nowadays, and automotive locksmithing. We have transponder keys, we have chips within the keys, now we have prox keys that don’t even require you to plug it into the car. You just put it in your pocket, go up to your car. I got a brand new Toyota, go up into my, just walk up to the door, pull it, pull the door handle, it opens up, I sit in the car, I push the button, and away I go. Now some people say this creates less opportunity for locksmiths, but the dealers are extremely expensive. Sometimes, we’re about the same price, but the customer doesn’t have to tow the car. We can go onsite, make keys to the car. It’s becoming more complex, but it’s actually becoming a little bit easier. You can now plug into the vehicles, and make keys to it and program our keys. So automotive locksmithing, even though it’s more complex, has become extremely more profitable. To make keys to some of the new cars, the customers are looking at hundreds, or sometimes thousands of dollars from the dealership. So we can make keys to cars way less than the dealerships. Sometimes we have the same price, but a lot of times we’re more convenient, we show up, plus we’re seven days a week, 24 hours a day if you want to do that, as well. So if you want to become an automotive locksmith, join our program, and you will learn how to become an automotive locksmith. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website, and you can see what online locksmith training I have for beginners, intermediate and advanced, as well as my covert methods of entry and my non-destructive methods of entry.

Recently, I tested 5+ Car Key Programmers to see if they could add a key to a
2014 Ford Mustang. Between tests, I erased the key and started fresh.

Also, not only which Programmer would add a new Ford Transponder key but bypass the Ford 10 minute wait time.

Automotive Locksmith Traning Sign up Now!

“How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

More Programmers to test in the near future.

I hope you enjoyed this video, please subscribe and hit the like button, thank you very much. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non-destructive methods of entry.

Mr. Locksmith™

————————————————————————————————-

Locksmith Courses: http://mrlocksmithtraining.com/

Automotive Locksmith  “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

 

———————————————————————————————————–
Business email: [email protected]

Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230

————————————————————————————————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/

————————————————————————————————-

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

About Terry Whin-Yates

————————————————————————————————-

Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.

————————————————————————————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

Call Mr. Locksmith Abbotsford (604) 200-8622

Become an Automotive Locksmith

How To Separate Rental Car Keys #1| Mr. Locksmith blog

How To Separate Rental Car Keys #1| Mr. Locksmith blog

Mr. Locksmith (604) 259-2953

For further information go to Mr. Locksmith White Rock.

When you rent a car you usually give you two car keys/fobs crimped together on a metal wire. If you lose the keys you could be liable to replace not one but two keys and it could cost you $250-$700.

When I travel I usually have no tools, my Leather Man or Swiss Army knife (AirPort Security). A very simple method for breaking the crimped key chain wire is to just twist the two keys clockwise until either the cable or the crimp breaks.

Liked this video? Like, Share and Subscribe to Mr. Locksmith on YouTube.

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

Fast Facts Auto Book for Locksmiths | Mr. Locksmith Automotive Training

Fast Facts Auto Book for Locksmiths | Mr. Locksmith Automotive Training

For further information go to http://mrlocksmith.com/

One of my go-to books for making keys to cars and motorcycles is “2015 Edition FAST FACTS — 1965-2015 Auto’s and Cycles” by Robert G Sieveking from Sieveking Products Company. This is a great book. This is the 2015 version. Every two years, a new updated version comes out.

This is my go-to fast book when I’m talking to customers when I’m going out to the job, it has most if not all of the domestic automotive, five-ton trucks, highway trucks, and it also has extensive motorcycles. This is a fantastic book, I highly recommend it.

The “Helps Section” gives pointers and many specific transponder programming procedures that have been tested and proven in actual use. GM VATS system information, key progressions and special notes on a number of autos give you the benefit of nearly 40 years of “on the road” experience. The motorcycle index is the largest listing of 2-wheeled vehicles anywhere.

Fast Facts™ is the premier Locksmiths reference to foreign & domestic auto and motorcycle keys. Fast Facts™ is an encyclopedic listing of cars and motorcycles found in the North American Market from 1965 to present. In its 11th Edition (2010-15) the fast Facts™ book is a “Must-Have” item for all locksmiths that make keys for autos and motorcycles. Much expanded for 2015. There are now over 200 motorcycle key plates and 638 auto key plates. Many new or changed transponder Facts. The Index lists 3761 autos and over 1400 motorcycles.
Exclusive “Lay Flat” plastic spiral bound Desk Size is easier to use. When open, the book will not close like perfect bound books will do.
Fast Facts™ presents a Clear, Concise and Fully Indexed key making guide for autos and motorcycles. The NEW expanded motorcycle model index lists over 1400 motorcycle models, plus an additional 15 pages of Chinese and Korean motorcycles, scooters and handicap electric motorized chairs. Everything is at your fingertips. Fast Facts™ is clearly illustrated and fully indexed. Fast Facts contains more information than any other publication of its kind.

 

I hoped you enjoyed watching this video. Subscribe to my YouTube channel.

 

If you need an extra Car, Truck or Motorcycle key call Randy at Mr. Locksmith Automotive (604) 259-7617 or email [email protected]

Mr. Locksmith White Rock

White Rock Locksmith Main: (604) 210-9875

Downtown Vancouver Locksmith: (604) 262-1907

Downtown Vancouver Keystore: (604) 669-8008

Mr. Locksmith Automotive: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

MVP PRO Auto Key Programmer Review | Mr. Locksmith Video

Automotive Locksmith MVP PRO Auto Key Programmer Review | Mr. Locksmith Video

For further information go to www.mrlocksmith.com

My daily Auto Key Programmer is the HotWire and the MVP Pro. I am on the unlimited token plan for both programmers. For the past 5+ years, I have been purchasing and testing “Offshore Auto Key Programmers.”

I have several Off Shore MVP clones. The price was so low, we keep on testing to see if any Off Shore Key Programmer could replace our existing programmers.

The MVP Clones are poorly made and no consistency or reliability with the software.

One Off Shore clone will program Ford and Chrysler but not Honda. Another identical clone will do Honda but not some Fords.
Another clone may work on a Nissan, but no one unit will do everything. It’s just been a zero.

So we kept on buying these, kept on testing them. Our dongles would break. The units would break. They’d fall apart. The software was inconsistent.

However, we found one clone that consistently worked well with Honda reflashes, specifically the 1998-2002 Honda Preludes.

In the early day we were just trying to save tokens, and really did we save any money? No, the clones were not good. There’s no consistency.

But again, if you don’t try, you don’t know. And there are some good units out there that the Chinese are coming out with now that are making some of the good stuff look bad.

Some of the new offshore auto key programmers they are using their own software, their own designs, and they are not clones or scammer units. Some of the Off Shore Key Programmers actually seem to be getting there.

Well, they’re coming out with nice updates on them, so they are becoming consistent.

The thing is with everything, you could have an Offshore made, really good programmer, and now they have counterfeit units of that that are total garbage.

So why are some of these Auto Key Programmers $300 and the other unit’s $50? The $50 unit is a total clone and it’s a total piece of garbage. How do you know? You don’t. That’s the big problem.

One way to find out is if you read the automotive forums.

Talk to other Locksmiths and view our videos.

The various plugins quality was all over the map. Some very good forums on Facebook, KeyPro website, ClearStar, etc.

So far, again, we’ve talked about this before, our go-to units are the MVP Pro and Hotwire.

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

 

So again, stay tuned for our other videos in the series. This is the MVP Pro. Thank you. I hope you enjoyed watching this video.

Subscribe to my channel.

If you need an extra Car, Truck or Motorcycle key call Randy at Mr. Locksmith Automotive (604) 259-7617 or email [email protected]

Mr. Locksmith White Rock

White Rock Locksmith Main: (604) 210-9875

Downtown Vancouver Locksmith: (604) 262-1907

Downtown Vancouver Keystore: (604) 669-8008

Mr. Locksmith Automotive Locksmith: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities and automotive locksmith near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

 

 

Off Shore Auto Key Programmer Clones | Mr. Locksmith Video

Off Shore Auto Key Programmer Clones | Mr. Locksmith Video

For further information go to http://mrlocksmith.com/

My daily Auto Key Programmer is the HotWire and the MVP Pro. I am on the unlimited token plan for both programmers. For the past 5+ years, I have been purchasing and testing “Offshore Auto Key Programmers.”

I have several Off Shore MVP clones. The price was so low, we keep on testing to see if any Off Shore Key Programmer could replace our existing programmers.

The MVP Clones are poorly made and no consistency or reliability with the software.

One Off Shore Key Programmer clone will program Ford and Chrysler but not Honda. Another identical clone will do Honda but not some Fords.
Another clone may work on a Nissan, but no one unit will do everything. It’s just been a zero.

So we kept on buying these, kept on testing them. Our dongles would break. The units would break. They’d fall apart. The software was inconsistent.

However, we found one clone that consistently worked well with Honda reflashes, specifically the 1998-2002 Honda Preludes.

In the early day we were just trying to save tokens, and really did we save any money? No, the clones were not good. There’s no consistency.

But again, if you don’t try, you don’t know. And there are some good units out there that the Chinese are coming out with now that are making some of the good stuff look bad.

Some of the new offshore auto key programmers they are using their own software, their own designs, and they are not clones or scammer units. Some of the Off Shore Key Programmers actually seem to be getting there.

Well, they’re coming out with nice updates on them, so they are becoming consistent.

The thing is with everything, you could have an Offshore made, really good programmer, and now they have counterfeit units of that that are total garbage.

So why are some of these Auto Key Programmers $300 and the other unit’s $50? The $50 unit is a total clone and it’s a total piece of garbage. How do you know? You don’t. That’s the big problem.

 

One way to find out is if you read the automotive forums.

Talk to other Locksmiths and view our videos.

The various plugins quality was all over the map. Some very good forums on Facebook, KeyPro website, ClearStar, etc.

So far, again, we’ve talked about this before, our go-to units are the MVP Pro and Hotwire.

Subscribe to my channel.

If you need an extra Car, Truck or Motorcycle key call Randy at Mr. Locksmith Automotive (604) 259-7617 or email [email protected]

Mr. Locksmith White Rock

White Rock Locksmith Main: (604) 210-9875

Downtown Vancouver Locksmith: (604) 262-1907

Downtown Vancouver Keystore: (604) 669-8008

Mr. Locksmith Automotive Locksmith: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities and automotive locksmith near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

 

 

Replace Ignition 1995 Ford Super Duty Pickup | Mr. Locksmith Automotive (604) 259-7617

 

Replace Ignition 1995 Ford Super Duty Pickup | Mr. Locksmith Automotive (604) 259-7617

For further information go to Mr. Locksmith Automotive Ford.

A car theft tried to steal a 1995 Ford Super Duty Pickup in Abbotsford and damaged the ignition but was unable to start the Ford Pickup Truck. However, the Ford ignition was so severely damaged and the key could no longer turn the ignition and start the Pickup Truck. Randy from Mr. Locksmith Automotive was able to remove the damaged Ford Ignition and rekeyed the replacement ignition to match the existing ignition and door keys.

Specialized Auto Locksmith Services

Mr. Locksmith Automotive(604) 259-7617  team up with highly trained auto locksmiths who effectively carry out car lockout solutions including lock picking, transponder key programming, ignition key replacement, and more! Whether you have lost keys, have a broken key in the ignition, or are locked out of car, Mr. Locksmith Automotive understands the importance of a fast response time.

With technicians available across multiple locations, an expert locksmith can arrive at your location within 30 minutes of your call! Auto locksmiths can work on a wide range of car brands, models, and key types (e.g., transponder key, remote key, ignition key, remote keyless entry, etc.).

Auto locksmith services include:

  • Car lockout solutions
  • 24 hour emergency locksmith care
  • Ignition key replacement
  • Ford Ignition Replacement
  • Extraction of broken key
  • Transponder key programming
  • Key Fobs Replacement
  • Expert lock picking
  • Open trunk solutions
  • Spare care key making

With the advances in auto security, key replacement can become an expensive and time consuming endeavor. By partnering with auto locksmith experts, key programming can be achieved on the spot! Chip keys can be duplicated or reprogrammed. No towing required. No need to turn to the dealership, which is likely to be a more expensive route. Trusting your car lockout situation with non-experts can result in damage to your car or faulty ignition key replacement or programming results. Lock picking should be handled by professionals who possess the skill and tools to safely open car doors. If you need to open trunk, technicians are very familiar with effective techniques across a wide range of car brands and models.

Mr. Locksmith Automotive and associates have the skill and knowledge to perform lock picking, extract a broken ignition key, and replace an immobilizer key, chip key, transponder key, and more! You can trust that your vehicle is in expert and reliable hands!

Locksmiths are located in multiple locations in order to respond to your call within 30 minutes. You can call Mr. Locksmith Automotive anytime, any day. Our customer service line is open 24 hours a day, 7 days a week, 365 days a year!

 

Replace 1995 Ford Super Duty Pickup Ignition in Abbotsford Mr. Locksmith Automotive

Replace 1995 Ford Super Duty Pickup Ignition in Abbotsford Mr. Locksmith Automotive

Replace 1995 Ford Super Duty Pickup Ignition in Abbotsford Mr. Locksmith Automotive

 

 

 

 

 

 

 

Replace 1995 Ford Super Duty Pickup Ignition in Abbotsford Mr. Locksmith Automotive

Replace 1995 Ford Super Duty Pickup Ignition in Abbotsford Mr. Locksmith Automotive

 

 

 

 

 

 

 

 

If you need an extra Car, Truck or Motorcycle key call Randy at Mr. Locksmith Automotive (604) 259-7617 or email [email protected]

Mr. Locksmith White Rock

White Rock Locksmith Main: (604) 210-9875

Downtown Vancouver Locksmith: (604) 262-1907

Downtown Vancouver Keystore: (604) 669-8008

Mr. Locksmith Automotive: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

 

 

 

 

Replacing an Igniton of a 2001 Chev Express | Mr. Locksmith Blog

Replacing an Ignition of a 2001 Chev Express | Mr. Locksmith Blog

For further information go to Mr. Locksmith Automotive

A 2001 Chev Express Passenger Van was broken into and the thieves broke the ignition but were unable to steal the Van.

Van was parked on the 1000 Block of West 59th Ave Vancouver (Oak / 59th Ave).

 

Mr. Locksmith 2001 Chev Express

Mr. Locksmith 2001 Chev Express Ignition

Mr. Locksmith 2001 Chev Express Ignition

Mr. Locksmith 2001 Chev Express Parts Kit

 

 

Call Mr. Locksmith for further information http://www.mrlocksmith.com/

or email: [email protected]

Mr. Locksmith Vancouver

Vancouver Locksmith Main: (604) 239-0882

Downtown Vancouver Locksmith: (604) 262-1907

Downtown Vancouver Keystore: (604) 669-8008

Mr. Locksmith Automotive: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

 

 

 

 

Open a Locked 2017 Ford Fusion Energi Hybrid Vehicle | Mr. Locksmith

Open a Locked 2017 Ford Fusion Ford Fusion Energi Hybrid Vehicle | Mr. Locksmith.

For further information go to http://mrlocksmith.com/

Today, we are going to play with a 2017 Ford Fusion Energi. This thing is a hybrid. It uses a prox key. Also, it has a key override on the door, but I don’t think on the ignition. We’ll find out. We’ll go through everything, and we’ll play with it. We’re gonna show you how to open it. So just the traditional long reach tool. Now if you hit the electric lock, it’s not going to open on this model, so we just pull the door handle. And I always have the customer stand on the driver’s side. I always open up the car from the passenger side. Have the owner stand on the driver’s window. Have him look through it and have him help you. This just keeps him out of your hair so you can open up the car. Hitting the electric locks, not going to help. You have to pull the handle. And boom, off she goes. So pretty easy opening. If the car is dead and you can’t open it, you scan till pull out the physical key. Just gotta, you gotta depress, push it in, depresses. There we go. And then it just pulls off. So you have to put the key in properly. Put it on the top. 2017 Ford Fusion Energi, it’s a hybrid. Normal prox, easy to program in the proxes on the MVP. If you wanna cut the key, it’s an eight cut high security. We didn’t have a Lishi pick for it. We’re gonna get one if we have to pick it open. Again, very, very easy car to open. Just a simple long reach tool, but don’t hit the electric locks. Hit the handle, pull the handle to release it. And again, the key to get in if everything’s dead on the car, if you have this set, your customer has a set, they can pull out the key and physically open it up, remove the cap. Okay, so I hope that helps a little bit.

 

 

 

– Prox with Ford 8 cut High-Security key. Easy to add a key with the MVP Pro.

– Easy to open with a “Long Reach Tool” and Air Bags but you have to pull the handle to open.

– Key over-ride on the drivers’ door hidden in the handle.

Call Mr. Locksmith for further information http://www.mrlocksmith.com/

or email: [email protected]

Mr. Locksmith Vancouver

Vancouver Locksmith Main: (604) 239-0882

Downtown Vancouver Locksmith: (604) 262-1907

Downtown Vancouver Keystore: (604) 669-8008

Mr. Locksmith Automotive: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/