2000 Hummer H1 Broken Ignition | Mr. Locksmith White Rock

June 27, 2022 By

Share the post "2000 Hummer H1 Broken Ignition | Mr. Locksmith White Rock"

2000 Hummer H1 Broken Ignition: In 1992, AM General began selling a civilian version of the M998 Humvee vehicle to the public under the brand name “Hummer”. The first two Hummer H1s to be sold were purchased by Schwarzenegger.

2000 Hummer H1 Broken Ignition

Mr. Locksmith™ White Rock

https://mrlocksmithwhiterock.com/

#mrlocksmithwhiterock #locksmith #locksmithtraining

Question: Why does the GM produced H1 Hummer us a Ford 5 Cut Ignition?

H1 Hummer

The civilian model began in part because of the persistence of Arnold Schwarzenegger, who saw an Army convoy while filming Kindergarten Cop in Oregon and began to campaign and lobby for a civilian version to be available on the market. In 1992, AM General began selling a civilian version of the M998 Humvee vehicle to the public under the brand name “Hummer”. The first two Hummer H1s to be sold were purchased by Schwarzenegger.

M998 Humvee

2000 Hummer H1 Broken Ignition. H1 Hummer 5 Cut Ford Ignition Malfunction. The Ford 5 Cut ignition failed and this is usually caused by a small piece of the buzzer jams the pins or get bunched up in the back of the ignition . In most cases it is easy to remove the broken piece, turn the ignition to the accessory position, depress the retainer pin and remove the ignition. However, somebody who did not know what they were doing, cracked the ignition and turned a simply car locksmith job into a bit of a nightmare.

Customer was happy to get back on the road. Note: H1 Hummer manufactured by GM, has a GM Diesel engine but uses a Ford 5 Cut Ignition.

Car Locksmith Service

Your automotive locksmith needs will be taken care of by our qualified locksmiths and equipped service vehicles.  We’re available to help you open your car without causing damage, make new keys or replace a car ignition.

2000 Hummer H1 Broken Ignition | Mr. Locksmith White Rock

2000 Hummer H1 Broken Ignition | Mr. Locksmith White Rock

 

If you own any of the following brands of car, truck or motorcycle, we can manufacture a new key for you: Acura, Audi, BMW, Buick, Cadillac, Chevrolet (Chevy), Chrysler, Citroen, Daewoo, Daihatsu, Dodge, Fiat, Ford, General Motors (GMC), Honda, Hummer, Hyundai, Infiniti, Isuzu, Jaguar, Jeep, Kia, Landrover, Lexus, Lincoln, Mazda, Mercedes-Benz, Mercury, Mini, Mitsubishi, Nissan, Oldsmobile, Peugeot, Plymouth, Pontiac, Range Rover, Renault, Saab, Saturn, Scion, Subaru, Suzuki, Toyota, Volkswagen (VW), and Volvo.  We can create keys for many other makes as well! Just give us a call and talk to one of our professional locksmiths. Are you wanting to have a transponder key duplicated?  Our expert locksmiths can help you!  Even high security keys for Mercedes-Benz, BMW, etc. are not a problem in most situations.  Limitations do apply, but contact us and we will let you know if we can help!  Our licensed locksmiths can save you money by repairing flip keys as well!

Contact us today to have an experienced locksmith help you with your automotive locksmith situation!

Mr. Locksmith™ White Rock

email: [email protected]

 

H1 Hummer Mr. Locksmith White Rock

H1 Hummer Mr. Locksmith White Rock

 

M998 Humvee, 2000 Hummer H1, 2000 H1 Hummer, Hummer H1, H1 Hummer, Hummer, Ford 5 Cut Ignition, AM General, AM General Hummer,

JOIN MR. LOCKSMITH™ YOUTUBE MEMBERSHIP CHANNEL TO GET ACCESS TO MEMBER ONLY PERKS: https://www.youtube.com/channel/UCjokUyTM9hMhTBjqgbuVtCA/join

Mr. Locksmith White Rock: (604) 210-9875

Mr. Locksmith Automotive: (604) 259-7617

Locksmith Training: http://mrlocksmithtraining.com/ #mrlocksmithwhiterock #locksmithtraining #locksmithtools

Mr. Locksmith™ White Rock email: [email protected]

Locksmith Courses: http://mrlocksmithtraining.com/

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia.

Terry Whin-Yates http://mrlocksmithtraining.com/about-terry-whin-yates/ Thanks for watching!

 

Filed Under: 2000 Hummer H1, Become An Automotive Locksmith, Blog, Car Locksmith, Locksmith Automotive, Locksmith Training, Mr. Locksmith, Mr. Locksmith White Rock, Mr. Locksmith™, Mr. Locksmith™ White Rock, Terry Whin-Yates, YouTube Locksmith, Youtube Video Tagged With: , , , , , , , , , , , , , , , , , , , ,

Milwaukee PACKOUT 3 Drawer Toolbox

April 3, 2022 By

Share the post "Milwaukee PACKOUT 3 Drawer Toolbox"

Milwaukee PACKOUT 3 Drawer Toolbox For Locksmiths White Rock| Mr. Locksmith™: The Milwaukee Modular Storage System is a durable storage system. The PACKOUT 3-Drawer Tool Box has a 50lbs weight capacity and a locking security bar allows you to padlock the drawers closed keeping them securely shut during transport.

Milwaukee PACKOUT 3 Drawer Toolbox

Mr. Locksmith White Rock: (604) 210-9875

Mr. Locksmith Automotive White Rock: (604) 259-7617

JOIN MR. LOCKSMITH™ YOUTUBE MEMBERSHIP CHANNEL TO GET ACCESS TO MEMBER ONLY PERKS: https://www.youtube.com/channel/UCjokUyTM9hMhTBjqgbuVtCA/join

The tool box is constructed with impact resistant polymers, all-metal ball bearing slides, and metal reinforced corners for ultimate jobsite durability. The 3-Drawer Tool Box also allows you to customize their drawer layout with Quick-Adjust Dividers.

The PACKOUT™ Modular Storage System allows you to customize your storage system for easy transportation and organization of tools and accessories.

Milwaukee PACKOUT 3 Drawer

Milwaukee PACKOUT 3 Drawer Toolbox For Locksmiths

I love my Milwaukee PACKOUT kit, kits and all my bits and pieces. I am super happy now. Had the two drawer the other day. Just got my three drawer in. Absolutely in love. I’m revamping how I do everything. This goes into the truck, the service truck nicely, goes into the shop nicely. I’m looking at a racking system. I’m happy with my wheeled cart. Getting older. We have a lot of apartment buildings.

I have my PACKOUTS for my mailbox kit, my deadbolts, and I just modular how I do things, or just grab it out of the truck or out of the shop. I don’t keep a lot of my safe opening gear in the service truck. I keep it in the shop. When I need it, I take out what I need and go to the job site. So this is gonna be great for locksmiths. I can lock it on the job tighter in the truck. Just added security. I have the smaller drawers, which is good for my pin kits. I don’t need the big drawers. This is gonna be full of deadbolts, Adams rite, the larger locks. This’ll be the, more the specialty lockout tools, maybe more the cylinders.

Milwaukee PACKOUT 3 Drawer Toolbox

Milwaukee PACKOUT 3 Drawer Toolbox For Locksmiths

My mailboxes are in a special PACKOUT already. So this will be like the different pin kits, my medical pin kit, my multi lock pin kit. So this will hold my more specialty tools, my pin kits, my medical pin kit, my lab pin kit. This is gonna be interesting. So I’ll start working on getting it all together. This is going to be great. I will have more videos coming on how I am setting up all my locksmith tools and gear and the stock into the kits.

Mr. Locksmith White Rock: (604) 210-9875

Mr. Locksmith Automotive White Rock: (604) 259-7617

 

Locksmith Training: http://mrlocksmithtraining.com/ #mrlocksmith #locksmithtraining #locksmithtools

Mr. Locksmith™ email: [email protected]

Locksmith Courses: http://mrlocksmithtraining.com/

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia.

Terry Whin-Yates‘ BC Security License is B4227. http://mrlocksmithtraining.com/about-terry-whin-yates/ Thanks for watching! 🙂

Milwaukee PACKOUT 3 Drawer Toolbox For Locksmiths

Milwaukee PACKOUT 3 Drawer Toolbox

Milwaukee PACKOUT 3 Drawer Toolbox For Locksmiths

Filed Under: Automotive Locksmith Near Me White Rock, Locksmith Videos, Locksmith White Rock, Locksmith White Rock Category, Mr. Locksmith, Mr. Locksmith White Rock, Mr. Locksmith™ White Rock, Terry Whin-Yates Tagged With: , , , , , , ,

Knipex Cobra XS 4 inch Piler Review Short | Mr. Locksmith™

January 19, 2022 By

Share the post "Knipex Cobra XS 4 inch Piler Review Short | Mr. Locksmith™"

Knipex Cobra XS 4 inch Piler Review: If you need emergency locksmith service for your business, your residence, your house, your condo, motorcycles, Mr. Locksmith Langley can help you. Call Emergency Locksmith Langley British Columbia.

Mr. Locksmith Langley: (604) 330-9915

Mr. Locksmith Automotive: (604) 259-7617

Knipex Cobra XS 4 inch Piler

This is the second most little tool I’ve ever bought. It’s a Knipex pliers, it was under $50. Look at the size of this, it’s tiny. It’s extremely strong from what I’ve seen. I bought these for my pick case. I’ll have some stuff showing my little tools that I use for broken keys and whatnot. This is just gonna come in handy for grabbing little bits and pieces. It’s overpriced, yeah, I wanted one and I’ll show you how I put it in my, in my pick case.

Knipex Pliers

Here is a comparison, these are new in my kit now in my everyday carry locksmith tools, and here’s the new tool. Apparently there’s one, that’s a five inch one. I don’t have that one yet. So I’m going to probably add that to my collection. This is my Knipex pliers that I have so far, and they’ve been updating my locksmith tools for these, and I’ll show you how this goes in my little pick case. First thing I grab when I go to do a lockout, most times.

The little pair of Knipex pliers are right in my case for every day, every single locksmith job, this is in my kit and that’s my little case for it. So I have a bigger pick case, but this is just first thing I grab, I got a lockout, go to the door. This is my first kit I grab. Hope you enjoyed the video, please subscribe, please hit the like button, and I hope you look forward to, I have some more interesting videos on locksmith tools coming up.

Knipex Cobra XS 4 inch Piler

Knipex Cobra XS 4 inch Piler

Mr. Locksmith™

Mr. Locksmith Langley: (604) 330-9915

Mr. Locksmith Automotive: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks go to Mr. Locksmith Training 

Filed Under: Hands-On Mr. Locksmith Training, Locksmith Langley, Locksmith Near Me Langley, Locksmith Services, Mr. Locksmith Langley, Mr. Locksmith™ Langley, Terry Whin-Yates Tagged With: , , , , , , , ,

No. 1 Mistake Locksmith Students Make | Mr. Locksmith White Rock

January 5, 2022 By

Share the post "No. 1 Mistake Locksmith Students Make | Mr. Locksmith White Rock"

Most Common Mistake Locksmith Students Make: Students in general do tend to commit errors but make no mistake about it, it is all part of the process of learning. As the saying goes, “Experience is the best teacher” and Mr. Locksmith Richmond has a whole batch of it. Having broken down Mr. Locksmith’s Top 10 Locksmith Student Mistakes, here is the no. 1 on that list:

 

@mr.locksmith Top Ten Locksmith Student Mistakes 1 of 10! #mrlocksmith #locksmith #locksmiths #locksmithservice #locksmithing #locksmithguy #locksmithtraining ♬ original sound – Mr. Locksmith

Mr. Locksmith Surrey (604) 210-9875

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks go to Mr. Locksmith Training

No. 1 Mistake Locksmith Students Make | Mr. Locksmith White Rock

No. 1 Mistake Locksmith Students Make | Mr. Locksmith White Rock

No. 1 Mistake Locksmith Students Make | Mr. Locksmith White Rock

No. 1 Mistake Locksmith Students Make | Mr. Locksmith White Rock

Filed Under: 24 Hour Locksmith Services, Become a Locksmith, How To Become A Locksmith, Locksmith Training, Locksmith Videos, Locksmith White Rock, Mr. Locksmith, Mr. Locksmith White Rock, Mr. Locksmith™, Mr. Locksmith™ White Rock, Student Locksmith Mistakes, Terry Whin-Yates Tagged With: , , , , , , , ,

Open Sentry Safe in less than 5 seconds! | Mr. Locksmith™ White Rock

December 15, 2021 By

Share the post "Open Sentry Safe in less than 5 seconds! | Mr. Locksmith™ White Rock"

Open Sentry Safe in less than 5 seconds! | Mr. Locksmith™ White Rock Video: Terry Whin-Yates, President and CEO of Mr. Locksmith demonstrated how easy it is to open a Sentry Electronic Safe is less than 5 seconds with no damage or “Signs of Entry” for the Kitsilano Business Leaders Meetup.

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks go to Mr. Locksmith Training

 

Terry Opened a Sentry Safe in Just 5 Seconds | Mr. Locksmith White Rock

Terry Opened a Sentry Safe in Just 5 Seconds | Mr. Locksmith White Rock

Filed Under: 24 Hour Locksmith Services, Become a Locksmith, Locksmith Near Me, Locksmith Training, Locksmith Videos, Locksmith White Rock, Mr. Locksmith, Mr. Locksmith White Rock, Mr. Locksmith™, Mr. Locksmith™ White Rock, Safe Opening, Terry Whin-Yates Tagged With: , , , , , , , ,

Remove and Replace Mailbox Lock | Mr. Locksmith White Rock

December 5, 2021 By

Share the post "Remove and Replace Mailbox Lock | Mr. Locksmith White Rock"

Remove and Replace Mailbox Lock: When a customer has lost their keys to the mailbox you can either pick the lock open or drill the shear line of the mailbox lock with an 1/8″ drill bit. Most mailbox locks it is less expensive and quicker to replace the mailbox lock. In Canada and the USA if the mailbox is located within an Apartment or Condo building it is the responsibility of the owner to duplicate keys and or replace locks. Check with your local Post Office for details.

Mr. Locksmith White Rock: (604) 210-9875

Automotive Locksmith White Rock: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks go to Mr. Locksmith Training

Mail box Locks White Rock

  • Replace Mailbox Lock
  • Mailbox lock change
  • Mailbox lock
  • Mailbox lock jammed
  • Mailbox locker –
  • Lost mailbox key
  • Mailbox key copy
  • Mailbox lock key replacement
  • Lost mailbox key apartment
  • Condo mailbox key replacement
  • Lost mailbox key Canada post
  • Community mailbox keys
  • Mailbox won’t open with key
  • Mailbox with lock and key

Mr. Locksmith White Rock: (604) 210-9875

Automotive Locksmith White Rock: (604) 259-7617

White Rock is named for a large white boulder on its beach near the promenade, a glacial erratic that migrated south during the last glaciation. The 486-ton granite boulder was kept white by shellfish-eating seabirds whose guano covered the rock so much that 19th-century sailors used it as a beacon. It is now kept white through monthly applications of white paint by the city parks department and has been a graffiti target.[The White Rock Pier is located nearby. Call Mr. Locksmith White Rock British Columbia.

 

Remove and Replace Mailbox Locks | Mr. Locksmith White Rock

Remove and Replace Mailbox Locks | Mr. Locksmith White Rock

Filed Under: Become a Locksmith, How To Become A Locksmith, How To Remove and Replace Mailbox Lock, Locksmith Near Me White Rock, Locksmith Training, Locksmith Videos, Locksmith White Rock, Mailbox Locks & Keys, Mr. Locksmith, Mr. Locksmith White Rock, Mr. Locksmith™, Mr. Locksmith™ White Rock, Terry Whin-Yates Tagged With: , , , , , , , ,

Is It Cheaper To Rekey or Replace Locks? | White Rock Mr. Locksmith™

November 30, 2021 By

Share the post "Is It Cheaper To Rekey or Replace Locks? | White Rock Mr. Locksmith™"

Is It Cheaper To Rekey or Replace Locks? Cheaper to Rekey or Replace Locks Whether you just moved into a new home or have been in the same house for a while, it might be a good time for you to look into changing your locks.

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks go to Mr. Locksmith Training

Is It Cheaper To Rekey Or Replace Locks | White Rock Mr. Locksmith

Is It Cheaper To Rekey Or Replace Locks | White Rock Mr. Locksmith

Filed Under: Become a Locksmith, Blog, Cheaper to Rekey or Replace Locks, High Security Deadbolt, High Security Locks, How To Become A Locksmith, Locksmith Near Me White Rock, Locksmith Training, Locksmith Videos, Locksmith White Rock, Mr. Locksmith, Mr. Locksmith White Rock, Mr. Locksmith™, Mr. Locksmith™ White Rock, Rekey Locks, Terry Whin-Yates Tagged With: , , , , , , ,

How to Rekey Weiser Kwikset Smart Key Lock | Mr. Locksmith Video

November 17, 2021 By

Share the post "How to Rekey Weiser Kwikset Smart Key Lock | Mr. Locksmith Video"

How to Rekey Weiser Kwikset Smart Key Lock: If your Weiser smart key won’t turn in the lock it is usually because the lock has malfunctioned. Also, occasionally the key will not enter the cylinder to unlock the door.

Rekeying Weiser Kwikset Smart Key Lock

Mr. Locksmith White Rock: (604) 210-9875

Car Locksmith White Rock: (604) 259-7617

Note: I do not recommend this lock, too easy to open with a simple tool.

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks go to Mr. Locksmith Training

How To Rekey Weiser Kwikset Smart Key Lock

How To Rekey Weiser Kwikset Smart Key Lock

Filed Under: Become a Locksmith, Locksmith Videos, Locksmith White Rock, Mr. Locksmith, Mr. Locksmith White Rock, Mr. Locksmith™, Mr. Locksmith™ White Rock, Rekey Locks, Rekey Weiser Locks, Terry Whin-Yates, Weiser Kwikset Smart Key Lock Tagged With: , , , , , , ,

Hands-On Locksmith Class Langley | Canada 2021

August 1, 2021 By

Share the post "Hands-On Locksmith Class Langley | Canada 2021"

Hands-On Locksmith Class Langley BC | Canada September 2021: The Hands-on and On-line Locksmith course provides you with a comprehensive knowledge of the most popular Locks and Lock Picking.

Mr. Locksmith Training Website

Hands-on Locksmith Training Langley | Mr. Locksmith

Call or TEXT Terry Whin-Yates at 1-604-773-5625   email: [email protected]

Note: Camping August 01-15, 2021 maybe a little bit difficult to talk with me but leave a text message or email and I will return your call when I have a signal.

To Sign-up for The 4 Day Hands-on  Locksmith Langley class go to Mr. Locksmith Training.

4 Days Hands-on Locksmith Training: LANGLEY BC.

LANGLEY, British Columbia Canada

  • September 6-9, 2021 – Monday to Thursday (10am-3pm) Langley, British Columbia Canada
  • September 13-16, 2021 – Monday to Thursday (10am-3pm) Langley, British Columbia Canada
  • September 20-23, 2021 – Monday to Thursday (10am-3pm) Langley, British Columbia Canada
  • October 4-7, 2021 – Monday to Thursday (10am-3pm) Langley, British Columbia Canada

More Cities SOON!

Become a Locksmith

The Hands-on and On-line Locksmith course provides you with a comprehensive knowledge of the most popular Locks and Lock Picking.

  • Lock Picking
  • Rekeying Locks
  • Master-keying
  • Padlocks
  • Key Blank Idenfication
  • Duplicating and Cutting Keys by Code
  • How to open malfunctioning locks
  • How to open vandalized locks
  • Bypass Techniques
  • Stand Alone Access Control
  • Lock type identification, installation and service
  • Padlocks (rekey and how to open locked padlocks)
  • High Security Locks
  • Hands-On Locksmith Class Langley
  • Zoom Conferencing or by appointment.

Exam: Optional On-line exam is 200 questions.

Real hands-on locksmith class designed to teach beginner Locksmiths, engineering or maintenance employees for small or large facilities (School, Hospital, Corrections, Policing, etc.) and is a good start for beginners to help you become a locksmith or start your own locksmith business.

Our Mr. Locksmith Professional Locksmith state-of-the-art training provides hands-on comprehensive knowledge about locking and unlocking principles, security issues, and effective use of cutting-edge products.

Locksmith Training

During the 4 Day Hands-On Locksmith Class taught by Terry Whin-Yates each student will cut over 25+ keys per student (by code and manual key machines) and rekey, shim, pick open, take apart (and put back together) lots of locks (deadbolts and key in knobs). Also, lock-outs, broken keys and picking locks. Learn the two most popular methods of picking locks and my own technique that I have developed over the past 35 years to pick open locks.

There are many advantages to having a professionally trained Institutional locksmith on staff.  Upgrading your maintenance, carpenters to be your in-house Institutional Locksmith will save you thousands of dollars per year. Every door in your facility has a locks and key or an access control system. These locks often need to be re-keyed, repaired or replaced.  Having a professional trained Institutional Locksmith on staff at your facility can help efficiently resolve security issues and can also better secure your facilities.  This will also provide significant cost savings over calling a contract locksmith.  This course is designed to teach your In-House Maintenance Staff how to perform Institutional locksmithing in-house.

Real hands-on locksmithing class designed to teach engineering or maintenance employees for small or large facilities (School, Hospital, Corrections, Policing, etc.) and is a good start for beginners to help you become a locksmith or start your own locksmith business.

Bringing your locksmithing in-house will save you time, money and provide better security.

To Sign-up for The 4 Day Hands-on  Locksmith Langley class go to Mr. Locksmith Training.

How To Pick Locks – Online Course

Regularly $397 – NOW ONLY $97 US

Starts September 6, 2021 (Zoom & On-Line) 

To Sigh-up for the Online “How to Pick Locks” go to Mr. Locksmith Training “How to Pick Locks”

Locksmith Pick Gun

Locksmith Pick Gun

Become an Automotive Locksmith

On Certificate in Automotive Locksmithing
2,500.00$USD 1,500.00$USD

On-Line Automotive Locksmith Training
  • Code Machines to make car keys
  • Vehicle codes and making keys
  • Transponder Keys, Duplication, Cloning and Programming
  • How to Make Keys to Ford, Chrysler, Toyota and Honda
  • How to Make Key to GMs
  • How to Make Keys to Japanese cars and Trucks
  • How to Make Keys to Korean Cars
  • How to Make Keys to Motorcycles
  • Ford Focus Ignition
  • Ford Focus Ignition – $49.95
  • Repair Honda Ignition – $49.95
  • How to open cars – $395.00
  • All the videos on how to rekey the car locks
  • Programming Tools
  • Clone Car Key
  • Special Automotive Lock Picks (Lishi, etc.)
  • Keys Locked in Truck
  • Protecting Service Trucks (Alarm to Hockey Puck Locks)
  • Introduction to Advertising Your Automotive Business
  • Zoom Conferencing every two weeks or by appointment

Exam: Optional On-line exam is 200 questions.-Line Institutional Locksmith Class

Online Institutional Locksmith Class

On-line and Zoom Institutional Locksmith Class (Starting September 6, 2021)

To Sign-up for The Certificate in Institutional Locksmith go to Mr. Locksmith Training.

12 – 24 Months Institutional On-Line Locksmithing Class which is designed to teach engineering or maintenance employees for large facilities (School, Hospital, Corrections, etc.).

Mr. Locksmith Certificate

Our Mr. Locksmith Professional Locksmith state-of-the-art training provides hands-on comprehensive knowledge about locking and unlocking principles, security issues, and effective use of cutting-edge products.

There are many advantages to having a professionally trained Institutional locksmith on staff.  Upgrading your maintenance, carpenters to be your in-house Institutional Locksmith will save you thousands of dollars per year. Every door in your facility has a locks and key or an access control system. These locks often need to be re-keyed, repaired or replaced.  Having a professional trained Institutional Locksmith on staff at your facility can help efficiently resolve security issues and can also better secure your facilities.  This will also provide a significant cost savings over calling a contract locksmith.  This course is designed to teach your In-House Maintenance Staff how to perform Institutional locksmithing in house.

Bringing your locksmithing in-house will save you time, money and provide better security.

The training in this Institutional Locksmith course will provide you with the skills necessary to become a more efficient and competent technician who can service, install, troubleshoot and masterkey, industrial lock systems.

This On-Line and Hands-on Institutional Locksmith Training gives you the opportunity to have professionally trained Locksmith’s on your property daily. This saves you money, time, secures your facilities, resolves security issues, gives you the first line of defense and improves your Facility Management.  This program was designed for the beginner as well as the experienced locksmith. We take you from the first steps in locksmithing to advanced locksmithing.

Complete Series: Includes all Introduction to On-Line Institutional Locksmith Training and an added Bonus the Consumer Safe Series (Sentry Safes, First Alert Safes, Hotel Safes, etc.) and Institutional Safes.

  • Rekeying Locks
  • Master-keying
  • Key Control
  • Institutional Software for Key and Lock Control
  • High Security Locks
  • Emergency Lock Down Procedures
  • Emergency Lock Down Locks and Doors
  • Servicing Panic Hardware
  • Padlocks
  • Key Blank Idenfication
  • Duplicating and Cutting Keys by Code
  • How to open malfunctioning locks
  • How to open vandalized locks
  • Bypass Techniques
  • Stand Alone Access Control
  • Integrated Access Control
  • Panic Hardware
  • Door Closers
  • Securing High Risk Areas
  • Lock type identification, installation and service
  • ANSI/BHMA standards
  • Padlocks (regular to High Security)
  • Safes
  • Suppliers
  • Zoom Conferencing or by appointment.

Exam: Optional On-line exam is 200 questions.

To Sign-up for The Certificate in Institutional Locksmithing go to Mr. Locksmith Training.

* Help with key control and master keying issues
* Help with technical information
* Help locating parts, supplies, key codes, etc.
* Help communicating internal needs to their institution.
* Help with electronic or access control issues.

Duties of an Institutional Locksmith

Duties of an Institutional Locksmith include installing, adjusting and repairing locks, making keys, and changing lock combinations. Locksmiths work on residential, automotive, commercial and institutional lock sets and door hardware. Locksmiths may also install and maintain more sophisticated security systems.

In general, the duties of an Institutional Locksmith include:

  • servicing and installing high-security lock systems and key control systems, window bars, deadlocks, and keyless entry locks
  • repairing, replacing, or adjusting damaged or defective components of an entrance or exit door, including door closers, hinges, electric release mechanisms and sometimes the door itself
  • changing lock key combinations by inserting new pins into locks
  • designing complex master key systems for industry, governments, and institutions

Institutional Locksmith Working Conditions

Usually, Institutional Locksmiths work a five-day week but maybe on-call nights and weekends to respond to emergencies. Some Institutional Locksmiths are may be required to work longer hours and have clerical duties related to running and maintaining larger facilities. Some Institutional Locksmith shops, especially mobile units, maybe small and crowded, requiring Institutional Locksmiths to work around benches, counters and stock. They sometimes are required to work in awkward or confined spaces. Those working in mobile units may be required to work in adverse weather conditions.

To Sign-up for The Certificate in Institutional Locksmithing go to Mr. Locksmith Training.

Hands-On Locksmith Class

Hands-On Locksmith Class

Hands-On Locksmith Class

How to Pick Locks: Hands-On Locksmith Class

How to Pick Locks: Hands-On Locksmith Class

Lab Wedge Pin Kit. Great for the Locksmith Shop or Service Truck

Lab Wedge Pin Kit. Great for the Locksmith Shop or Service Truck

Hands-on Locksmith Training Dates and Cities near you for Beginners,

Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training https://mrlocksmithtraining.com/

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

Lock Picks & Tension Wrenches

Lock Picks & Tension Wrenches

Open locked Sentry Electronic Data Safe

Open locked Sentry Electronic Data Safe

Keyless Lock

Keyless Lock

Hands-On Locksmith Class Langley BC

Call or TEXT Terry Whin-Yates at 1-604-773-5625

Email: [email protected]

Note: Camping August 01-15, 2021 maybe a little bit difficult to talk with me but leave a text message or email.

5 Million + Views!

 

Filed Under: Become a Locksmith, How To Become A Locksmith, Locksmith Training, Mr. Locksmith™ Tagged With: , , , , , , , , , , , , , , , , ,

Mr. Locksmith Richmond For Sale

January 10, 2021 By

Share the post "Mr. Locksmith Richmond For Sale"

Mr. Locksmith Richmond For Sale | Call (604) 239-2103

Locksmith Richmond For Sale: Hi, I’m Terry from Mr. LockSmith. I am looking for a Licensee for Mr. LockSmith Richmond, British Columbia. Locksmithing has been absolutely fantastic for me. I raised my family, I’ve had a nice life, I’ve had nice vacations, and it’s all because of locksmithing. Whether we got a good economy, bad economy, we still make money as locksmiths. And unfortunately, even during COVID, we had so many break-ins at night in the city, or everywhere, it was just break-ins like crazy, and mostly commercial break-ins. We still survived COVID, and we still doing well before, during, and after. It hit us a little bit, there’s no denying that, but we recovered pretty quick.

Being a locksmith is great. My grandfather was a locksmith, my father, my uncle. I had some of the best training in the world through family, and I’ve done lots of courses. Even now, I still take courses. A lot of manufacturers have good courses. So what I’ve done is I’ve looked at how we make money, and what’s the best products to sell, what’s the best services to offer. More importantly, the training program teaches you how to become a businessperson.

Mr. Locksmith™ Richmond

Become a Locksmith

How to become a locksmith and make money. For-profit is not a bad word. We want to be successful, we wanna drive nice service vehicles, we wanna have nice tools, we wanna have a nice life, and nice vacations, and raise our family, so we have to become profitable. We don’t treat this as a hobby, it’s a skilled trade. We keep care of the training, but more importantly, the training teaches you how to become a businessman, or a businessperson, because we will have to make money. It is really important that you not only become a good locksmith, but you also become a good businessperson. The training keeps care of that.

Locksmith Marketing

Our marketing, your website, your online presence, we keep care of all of that. I have highly qualified staff that have one purpose is to keep the social media up there, our YouTube channel is doing fantastic, and you know what, that YouTube channel is extremely good to help you make money with your clients. So our YouTube channel is strong, we have a lot of videos, a lot of views, well over a hundred years of watched video on our YouTube channel. And more importantly, those YouTube videos are advertising for your company, for Mr. LockSmith, and also they’re on your website. I love locksmithing, it’s been good for my life. I have very successful Mr. LockSmiths, they’re very happy, and we’ve done extremely well. It’s a brand new territory for us, we’re looking for a new owner.

Bump-Keys-Castration-Rings

Mr. Locksmith Bump Keys

Our marketing, your website, your online presence, we keep care of all of that. I have highly qualified staff that have one purpose is to keep the social media up there, our YouTube channel is doing fantastic, and you know what, that YouTube channel is extremely good to help you make money with your clients. So our YouTube channel is strong, we have a lot of videos, a lot of views, well over a hundred years of watched video on our YouTube channel. And more importantly, those YouTube videos are advertising for your company, for Mr. LockSmith, and also they’re on your website. I love locksmithing, it’s been good for my life.

I have very successful Mr. LockSmiths, they’re very happy, and we’ve done extremely well. It’s a brand new territory for us, we’re looking for a franchisee. Give me a call, give me an email, and we can talk about how you can become a locksmith and join our team at Mr. Locksmith Richmond BC.

Give me a call, give me an email, and we can talk about how you can become a locksmith and join our team at Mr. LockSmith Richmond.

Call Terry at Mr. Locksmith Richmond Call (604) 239-2103 or email [email protected]

Terry Whin-Yates is a 3rd Generation Locksmith with 35+ years of Locksmith experience and has a BA (Hons) from Simon Fraser University.

 

Mr.-Locksmith-Richmond-For-Sale-Call-604-239-2103

Mr. Locksmith Richmond For Sale | Call (604) 239-2103

Filed Under: Blog, How To Become A Locksmith, How to Become an Automotive Locksmith, Locksmith Business For Sale, Locksmith For Sale, Locksmith Richmond For Sale, Mr. Locksmith, Mr. Locksmith™, Terry Whin-Yates Tagged With: , , , , , , ,
Next Page »