2000 Hummer H1 Broken Ignition | Mr. Locksmith White Rock

2000 Hummer H1 Broken Ignition: In 1992, AM General began selling a civilian version of the M998 Humvee vehicle to the public under the brand name “Hummer”. The first two Hummer H1s to be sold were purchased by Schwarzenegger.

2000 Hummer H1 Broken Ignition

Mr. Locksmith White Rock: (604) 210-9875

Automotive Locksmith White Rock: (604) 259-7617

Question: Why does the GM produced H1 Hummer us a Ford 5 Cut Ignition?

H1 Hummer

The civilian model began in part because of the persistence of Arnold Schwarzenegger, who saw an Army convoy while filming Kindergarten Cop in Oregon and began to campaign and lobby for a civilian version to be available on the market. In 1992, AM General began selling a civilian version of the M998 Humvee vehicle to the public under the brand name “Hummer”. The first two Hummer H1s to be sold were purchased by Schwarzenegger.

M998 Humvee

2000 Hummer H1 Broken Ignition. H1 Hummer 5 Cut Ford Ignition Malfunction. The Ford 5 Cut ignition failed and this is usually caused by a small piece of the buzzer jams the pins or get bunched up in the back of the ignition . In most cases it is easy to remove the broken piece, turn the ignition to the accessory position, depress the retainer pin and remove the ignition. However, somebody who did not know what they were doing, cracked the ignition and turned a simply car locksmith job into a bit of a nightmare.

Customer was happy to get back on the road. Note: H1 Hummer manufactured by GM, has a GM Diesel engine but uses a Ford 5 Cut Ignition.

Car Locksmith Service

Your automotive locksmith needs will be taken care of by our qualified locksmiths and equipped service vehicles.  We’re available to help you open your car without causing damage, make new keys or replace a car ignition.

2000 Hummer H1 Broken Ignition | Mr. Locksmith White Rock

2000 Hummer H1 Broken Ignition | Mr. Locksmith White Rock

 

If you own any of the following brands of car, truck or motorcycle, we can manufacture a new key for you: Acura, Audi, BMW, Buick, Cadillac, Chevrolet (Chevy), Chrysler, Citroen, Daewoo, Daihatsu, Dodge, Fiat, Ford, General Motors (GMC), Honda, Hummer, Hyundai, Infiniti, Isuzu, Jaguar, Jeep, Kia, Landrover, Lexus, Lincoln, Mazda, Mercedes-Benz, Mercury, Mini, Mitsubishi, Nissan, Oldsmobile, Peugeot, Plymouth, Pontiac, Range Rover, Renault, Saab, Saturn, Scion, Subaru, Suzuki, Toyota, Volkswagen (VW), and Volvo.  We can create keys for many other makes as well! Just give us a call and talk to one of our professional locksmiths. Are you wanting to have a transponder key duplicated?  Our expert locksmiths can help you!  Even high security keys for Mercedes-Benz, BMW, etc. are not a problem in most situations.  Limitations do apply, but contact us and we will let you know if we can help!  Our licensed locksmiths can save you money by repairing flip keys as well!

Contact us today to have an experienced locksmith help you with your automotive locksmith situation!

Mr. Locksmith™ White Rock

email: [email protected]

 

H1 Hummer Mr. Locksmith White Rock

H1 Hummer Mr. Locksmith White Rock

 

M998 Humvee, 2000 Hummer H1, 2000 H1 Hummer, Hummer H1, H1 Hummer, Hummer, Ford 5 Cut Ignition, AM General, AM General Hummer,

JOIN MR. LOCKSMITH™ YOUTUBE MEMBERSHIP CHANNEL TO GET ACCESS TO MEMBER ONLY PERKShttps://www.youtube.com/channel/UCjokUyTM9hMhTBjqgbuVtCA/join

Mr. Locksmith White Rock: (604) 210-9875

Mr. Locksmith Automotive: (604) 259-7617

Locksmith Training: http://mrlocksmithtraining.com/ #mrlocksmithwhiterock #locksmithtraining #locksmithtools

Mr. Locksmith™ White Rock email: [email protected]

Locksmith Courses: http://mrlocksmithtraining.com/

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia.

Terry Whin-Yates http://mrlocksmithtraining.com/about-terry-whin-yates/ Thanks for watching!

Call Mr. Locksmith White Rock  Right Away for Experienced Locksmithing & Security Services in White Rock British Columbia

 

Bike Lock vs Cordless Grinder | Mr. Locksmith™ White Rock

Bike Lock vs Cordless Grinder | Mr. Locksmith™ White Rock

Locksmith Courses and How to Pick Locks: http://mrlocksmithtraining.com/

How to Make Keys to Cars, Automotive Locksmith ONLINE COURSE

Open U Lock with a cordless grinder with a cutting wheel.

Open bike lock with a cordless grinder.

I use a Milwaukee Cordless Grinder with a cutting wheel to open most if not all Bike Locks. Just be careful where the sparks go, avoid flammable or plastics that can burn or pit. Wear Gloves and Safety glasses.


One of the best tools in the whole world is a cordless grinder with a cutting wheel. This saves my butt all the time. I could use a big pair of bolt cutters on this, but sometimes I find, when you use the bolt cutter, you can get a piece flying off and it could break a window or something or hurt somebody. I like this, you just have to be aware of the sparks will wreck your shirt. Also, you cannot be by anything flammable or anything plastic or anything glass. So just be really careful when the sparks shoot off of this thing. Usually, I aim the sparks so they go down, usually, it’s okay. So I am just going to cut off this inexpensive bike lock, I am going to use my cordless grinder. I always like to secure whatever I am cutting. I like to secure with a pair of vise grips. Now, wear your safety glasses, I always wear my gloves, just in case. Now, this is interesting. The battery is just a little tiny efficiency one. It is not big enough, not enough amperage, I guess to run the cordless grinder. So I am going to change my, swap my battery out. It’s the first time doing it with a little one. I just thought, “Oh, let’s give it a try.” Yes, look at that and look at, just sucking up the power on this. So I am going to just swap out the battery with a bigger one. I have heard about some people having some trouble with other tools. I have never had a problem with the drill. This is basically double. This is the bigger one. I have never had a problem using this. This is the first time using that. Let’s just swap it out real quick. Full power. And let’s finish it off. There we go. And remember this is hot hot hot. Don’t touch the ends, be careful you don’t burn off the bike. Yes, I could have picked this. It requires a special pick, it’s not that difficult, but I’m a for-profit locksmith. I am not going to make keys to this, it’s disposable. I think they paid 10 bucks for this. It costed more for the service call to get it off, but we didn’t destroy the bike. So, again, you could pick some of these, you could do whatever. My bottom line is I have to get this done fast and efficient and I just cut it off.

Open U Lock with a cordless grinder with a cutting wheel.

Open bike lock with a cordless grinder.

I use a Milwaukee Cordless Grinder with a cutting wheel to open most if not all Bike Locks. Just be careful where the sparks go, avoid flammable or plastics that can burn or pit. Wear Gloves and Safety glasses.

Mr. Locksmith™

Hope you enjoyed this video, please subscribe and hit the like button, thank you very much. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non-destructive methods of entry.

https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

Mr. Locksmith™

————————————————————————————————-

Locksmith Courses: http://mrlocksmithtraining.com/

Automotive Locksmith  “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

 

———————————————————————————————————–
Business email: [email protected]

Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230

————————————————————————————————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/

————————————————————————————————-

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

http://mrlocksmithtraining.com/about-terry-whin-yates/

————————————————————————————————-

Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.

————————————————————————————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

Call Mr. Locksmith White Rock (604) 210-9875

 

Bike Lock vs Cordless Grinder Mr. Locksmith

 

 

CoronaVirus Business Opportunities for Locksmiths | Mr. Locksmith White Rock

CoronaVirus Business Opportunities for Locksmiths | Mr. Locksmith White Rock

Locksmith Courses and How to Pick Locks: http://mrlocksmithtraining.com/

How to Make Keys to Cars, Automotive ONLINE COURSE

The coronavirus is spreading all over the world. I did a video back at the beginning of January 2020, I said this is going to hit us hard, locksmiths, be prepared. Now it’s here, they’re shutting down borders, they’re stopping flights. It is affecting business. In some areas, we’ve had big drops in our business. But now we’re seeing an increase in other parts of the businesses and this is an opportunity for locksmiths. Public events are shutting down but now they want to restrict more access and they’re rekeying the locks to stop people from going into other areas. Seniors homes, they now have to restrict access because of the coronavirus and they are rekeying all their exterior doors. So there are huge opportunities.


Businesses are more vulnerable. We just had a bunch of churches got broken into because they’re not as busy with shutting down community events so they’re quiet and the burglars can’t bust into the homes because everybody’s home so now they’re breaking into churches. I’m just gonna leave right now, I’m going to a church and we’re gonna have to secure it down.

Locksmiths, you can do a couple of things. You can cocoon up and just ride it out or you can go out there and help secure your community and make some money too.

They are shutting down borders, shutting down air flights but is an opportunity, locksmiths. Go out there, be prepared, do some basic stuff call your clients, give them some security ideas. They are fearful, they need some expert guidance.

Hope you enjoyed this video, please subscribe and hit the like button, thank you very much. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non-destructive methods of entry.

https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

Mr. Locksmith™

————————————————————————————————-

Locksmith Courses: http://mrlocksmithtraining.com/

Automotive Locksmith  “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

———————————————————————————————————–
Business email: [email protected]

Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230

————————————————————————————————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/

————————————————————————————————-

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

http://mrlocksmithtraining.com/about-terry-whin-yates/

————————————————————————————————-

Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.

————————————————————————————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

Call Mr. Locksmith White Rock (604) 210-9875

CoronaVirus Business Opportunities for Locksmiths White Rock

Mr. Locksmith Tests 5+ Car Key Programmers on 2014 Ford Mustang | Mr. Locksmith™ White Rock

Mr. Locksmith Tests 5+ Car Key Programmers on 2014 Ford Mustang | Mr. Locksmith™ White Rock

Automotive Locksmith Courses and How to Pick Locks: http://mrlocksmithtraining.com/

I tested 5+ Car Key Programmers to see if they could add a key to a
2014 Ford Mustang. Between tests, I erased the key and started fresh.

Also, not only which Programmer would add a new Ford Transponder key but bypass the Ford 10 minute wait time.

I tested the following Car Key Programmers:

Zed Full
AutoProPad
MVP
X100
IM100
SKP-SKP900

More Programmers to test in the near future.

I hope you enjoyed this video, please subscribe and hit the like button, thank you very much. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non-destructive methods of entry.

Mr. Locksmith™

————————————————————————————————-

Locksmith Courses: http://mrlocksmithtraining.com/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

Automotive Locksmith  “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

———————————————————————————————————–
Business email: [email protected]

Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230

————————————————————————————————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/

————————————————————————————————-

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

http://mrlocksmithtraining.com/about-terry-whin-yates/

————————————————————————————————-

Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.

————————————————————————————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

Call Mr. Locksmith White Rock (604) 210-9875

Mr. Locksmith Tests 5+ Car Key Programmers on 2014 Ford Mustang Mr. Locksmith™ White Rock

I am going to program in a key to a Ford Mustang. This is a 2014 Ford Mustang. We’re going to use a 2014 Ford Mustang, and we’re going to program automotive keys into the Ford. Always test your car first with a mechanical key, if it works, the ignition turns it, of course it won’t start it ’cause it’s a transponder, and then we make keys using our transponder key, and we’re gonna program it in. Right now, the mechanical key is perfect, transponder key, perfect. Now, let’s check it in the ignition. Put the key in the ignition, and of course it is not going start the car. But that’s cool. Put the transponder key, I’ve got it good, okay.

Let’s hook up the programing. So right now, I’m gonna use the Zed-Full, and we’re gonna program in our functional key. Okay, so I’ve plugged in the OBD II plug. Zed-Full is nice, sits on the steering wheel. That’s what I like about this one. Put the ignition key in, and we’ll start programming. Erase all keys, we can add a key, add two keys. Usually a 10-minute wait. We’ll test the key. And the sound of power, and we just made some money. A key program gonna use right now is the Auto ProPad. This is surprising, been one of our go-to machines. Right now it’s very very effective, let’s see how it does on the 2014 Mustang. We’re gonna program a key. Okay, we’re plugging it in the OBD II. This is the Auto ProPad. The key is in. Pretty simple menu. It should bypass, and success. And let’s give it a try. In position. There’s no 10 minute, it does the 10 minute bypass nicely. And success. Perfect. Let’s just try the other key. It starts the car perfectly. Auto ProPad, pass. Gonna use The MVP to program a 2014 Mustang transponder key. So this is The MVP Pro and has the super dongle. We’re just gonna plug into the OBD II port. Now there are two ways this thing comes in, it’s per token, or you get a monthly on it. We put on the security code. Now we wanna put the key in. Let’s see if it starts the car. And it’s perfect. And again, with this one you can add a key, erase keys. If you erase keys, you got to have two master keys ready to go. Okay, gonna use the IM100 to program the 2014 Ford Mustang. So this is the IM100, let’s see how it does. We’re gonna plug in the IM100 into the OBD II. Tell me when to click the key in. Now the IM100 will not do the bypass on the 10 minute bypass. So we have to actually wait 10 minutes, so we’re just going to let it cycle through for 10 minutes, and then we’ll see if it starts the car. Okay, let’s see if it works. Okay, IM100 works. But, it’s a 10 minute wait time. Unfortunately, it will not bypass in this version. Maybe the newer versions do but this is an older version, we’ll get our hands on the new version and see what happens. Okay, let’s program the Mustang with X-100. I’ll just plug it in, let’s see what happens. Typed everything down, let’s see if we got a communication now. No. Let’s give it a second try here, see if we can communicate. We typed everything up, we’ve plugged it in. Again, this is not never on of our main, it’s a backup to the backup to the backup. When everything else doesn’t fail, you start going through your backup machines. As we talked before, you need two machines for sure, key programmers. So, failed to communicate. We have a fail. We’re gonna program key to the 2014 Mustang. This is a SKP-900. Bought this, it has a highly rated for Nissan. So we bought it, knocked off a few Nissans, it was good. Let’s try it on the Mustang. SKP-900, turned it on, it’s all plugged into the OBD II. See how we go, old-style menu. Bypass the 10 minute or close onto the 10 minute. Okay, SKP-900, it wouldn’t do the 10 minute bypass. We waited for 10 minutes. And it is successful. So, but, we had to wait 10 minutes. Most of the car programmers can add a key, add a transponder key to the system. Most, if not all, were able to bypass the 10 minute wait time, which is a huge saving in times. As you can see, one just totally failed to communicate. We tried everything, had good luck with that on Hondas, didn’t do well on this 2014 Mustang. I’m gonna try all of these on several more Fords, and we’ll see how they do in other videos. But overall, everything did way better than I expected. I hope you enjoyed watching this video. Subscribe to my channel. Also, visit my website, and you can see what online locksmith training I have for beginners, intermediate and advanced, as well as my covert methods of entry, and my non-destructive methods of entry.

Become an Automotive Locksmith | Mr. Locksmith™ Training

Become an Automotive Locksmith | Mr Locksmith Training: Online Locksmith Training

Automotive Locksmith Course Sign Up Now: http://mrlocksmithtraining.com/

Welcome back, this is “How to become an Automotive Locksmith.”

I have been making keys to cars the day I got my driver’s license, at 16 years old and one day. I got my driver’s license and the first thing I did was load up the trunk of the car with tools so I could go out there and make keys to cars. I was opening cars like crazy, I’m only 16, we had a family locksmith business, so I’m opening up cars. It was so easy, back in those days, a slim jim, a flat piece of band steel we made, and a coat hanger. And I had a chrome-plated coat hanger because people got upset if I took their coat hanger and opened up their door, with the button. I made a little shepherd’s hook and opened it, they got mad and they didn’t want to pay, but if I took out this shiny, chrome coat hanger and opened up their door, they just thought I was a genius. I’ve been doing this a long time, been making keys to cars, and actually, it was very easy, when I was a kid, and teenager, and then into my 20s, cars were a mechanical key. If you had the keys, a lot of the automotive had the key codes, it was a fun business and not too many people did it. Which brings us to nowadays, and automotive locksmithing. We have transponder keys, we have chips within the keys, now we have prox keys that don’t even require you to plug it into the car. You just put it in your pocket, go up to your car. I got a brand new Toyota, go up into my, just walk up to the door, pull it, pull the door handle, it opens up, I sit in the car, I push the button, and away I go. Now some people say this creates less opportunity for locksmiths, but the dealers are extremely expensive. Sometimes, we’re about the same price, but the customer doesn’t have to tow the car. We can go onsite, make keys to the car. It’s becoming more complex, but it’s actually becoming a little bit easier. You can now plug into the vehicles, and make keys to it and program our keys. So automotive locksmithing, even though it’s more complex, has become extremely more profitable. To make keys to some of the new cars, the customers are looking at hundreds, or sometimes thousands of dollars from the dealership. So we can make keys to cars way less than the dealerships. Sometimes we have the same price, but a lot of times we’re more convenient, we show up, plus we’re seven days a week, 24 hours a day if you want to do that, as well. So if you want to become an automotive locksmith, join our program, and you will learn how to become an automotive locksmith. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website, and you can see what online locksmith training I have for beginners, intermediate and advanced, as well as my covert methods of entry and my non-destructive methods of entry.

Recently, I tested 5+ Car Key Programmers to see if they could add a key to a
2014 Ford Mustang. Between tests, I erased the key and started fresh.

Also, not only which Programmer would add a new Ford Transponder key but bypass the Ford 10 minute wait time.

Automotive Locksmith Traning Sign up Now!

“How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

More Programmers to test in the near future.

I hope you enjoyed this video, please subscribe and hit the like button, thank you very much. I hope you enjoyed watching this video, subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced as well as my covert methods of entry and my non-destructive methods of entry.

Mr. Locksmith™

————————————————————————————————-

Locksmith Courses: http://mrlocksmithtraining.com/

Automotive Locksmith  “How to make keys to cars and trucks” https://www.mrlocksmithtraining.com/product/certificate-automotive-locksmithing/

4 Day Hands-On Training: https://www.mrlocksmithtraining.com/product/4-days-hands-on-locksmith-class-langley-bc-2020/

How to Pick Locks: https://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

How to Open Sentry Safes: https://www.mrlocksmithtraining.com/first-training-video-on-safe-opening-series/

How to Make Keys for Thule & Yakima Ski Rack and Bicycle Racks: http://mrlocksmithtraining.com/

Certificate in Professional Locksmithing: https://www.mrlocksmithtraining.com/product/certificate-professional-locksmithing/

 

———————————————————————————————————–
Business email: [email protected]

Fan mail/products to be reviewed can be sent to:
Mr. Locksmith
1685 H Street
Blaine, Washington
98230

————————————————————————————————-
Locksmith Tools:
Lab Kit Large: https://amzn.to/37ibGEZ
Lab Mini Pin Kit: https://amzn.to/2OIewNa
Bump Keys: https://amzn.to/2UIRVUC
Locksmith Tweezers: https://amzn.to/3bCvh6i
Lock Follower Set: https://amzn.to/31JhaY9
Best Locksmith Files: https://amzn.to/2Se28GP
LAB LKG001 5 N 1 Key Gauge: https://amzn.to/3bswZH4
Keedex K-22 Lever Opening Tool: https://amzn.to/2vilG3L
Master Locksmithing Book: https://amzn.to/2viTUUX
Rare Earth Magnet: https://www.mrlocksmithtraining.com/product/400-lbs-pull-rare-earth-magnet/

————————————————————————————————-

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years of experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

About Terry Whin-Yates

————————————————————————————————-

Thanks for watching! 🙂
Every video includes some form of paid promotion or sponsorship. Links in description are affiliate links. My videos are for educational purposes only. Information is subject to change/update at any time.

————————————————————————————————-

Mr. Locksmith with Terry Whin-Yates is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

FTC Disclosure Statement:
Some links on this youtube channel may be affiliate links. We may get paid if you buy something or take action after clicking one of these.

Call Mr. Locksmith Abbotsford (604) 200-8622

Become an Automotive Locksmith

Top 3 Screwdrivers for Locksmiths | Mr. Locksmith Video

Top 3 Screwdrivers for Locksmiths | Mr. Locksmith Video

For further information go to Mr. Locksmith White Rock

My top 3 Screwdrivers

Let us talk about three of the must have tools you have to have for your locksmith kit. Every one locksmith must have these three tools: Megapro set, Hex set, and the Tamperproof kit.

The Megapro set

The Megapro set – this is the original and inside it it has the flatheads, the Robinsons, the Phillips and some torques. That is absolutely fantastic. It’s a go-to tool. It’s always there, it’s got the tools.

The next one on my kit – the Hex set.

The Hex set

The Hex set – It’s got all the basic or the most popular sizes in it. You have to have this  screwdriver if you’re a locksmith because so many times you’ve misplaced your Allen keys. This is, a must have, fantastic tool. Especially we’re getting a lot of European made locks out there. you still need complete Allen key sets, but you can just grab this and 90% of the time, if not more, this will do the trick.

The other one is the Tamperproof kit.

The Tamperproof set

Tamperproof kit – This is the MegaPro. What it is, it’s for taking out the tamper-proof screws. It’s got all the most popular tamperproofs and torques an dthe flatheads with the holes inside. It is really, really cool.

So these are the three must have tools for everybody. You gotta have these in your locksmith kit. The original MegaPro, it’s got the most popular screws you’re going to run across every single day. The Hex, because you’re running across a lot of these in locks now, more and more all the time, this will probably, used 90% of the time, you’ll still need an Allen key set but it does the trick. And the Tamperproof. This will do for taking out those one way screws that are flatheads and it’s got the special bit for taking out the one way flatheads. It’s got the hex with the hole in it and the torques with the hole in it. Must have tools for the locksmith. For a beginner or a pro, this is a lifesaver. Have a good day. I hope you enjoyed watching this video.

Mr. Locksmith White Rock

White Rock Locksmith Main: (604) 210-9875

Downtown Vancouver Locksmith: (604) 262-1907

Downtown Vancouver Keystore: (604) 669-8008

Mr. Locksmith Automotive Locksmith: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities

Unboxing Lock Tech GM Ignition Removal Tools | Mr. Locksmith Video

Unboxing Lock Tech GM Ignition Removal Tools | Mr. Locksmith Video

For further information go to Mr. Locksmith White Rock

Unboxing Lock Tech GM Ignition Removal 

So we have a new “toy”, from LockTech. Instead of an unboxing, we will call it an “unbagging”. It’s a full set from AccuReader LockTech. And this is the ignition removal tools. A onewhole set, is all four of them. Rather than buy one at a time, just buy the whole thing. It would save you some money. And again, this is an unbagging, not unboxing. It has never been opened, and it will be the first time of us “playing” with it. We’ve been using AccuReader LockTech’s tools for years, so it is the first time getting like the whole little set here.

So get that there. It is a total unbagging. They’re easy to tell apart which is kinda cool. So we’ve got a blue side, a yellow side, a green one with a toy. So we got the whole set here of four. Most of their products,  by the way are extremely well made. So it does the trick. And we’ll show this in action, this is just an unbagging today, we’ll show it in action down the road.

These four different tools, they call it the V1, V2, V3, V4. And this’ll take out the ignitions on a whole lot of cars like the Chevrolet Cruzes, Chevrolet Colorado, Silverado, the Alero. It is an interesting tool for me. It’s removing the ignition cylinders from GM vehicles without drilling or damaging which is very cool. We’ve had their other products even before. Some of these are earlier ones, but they’re as fantastic. Instructions comes with the bag.

All four (4) of GM Ignition Removal Tools Set

 

We’ll post some videos of us playing with this. So I hope that helps a little bit. We will play with some ignitions later, but right now this is just an unbagging of a brand new “toy” from AccuReader LockTech for us. I hope you enjoyed watching this video. Subscribe to my channel. Also, visit my website and you can see what online locksmith training I have for beginners, intermediate, and advanced, as well as my covert methods of entry and my nondestructive methods of entry.

Mr. Locksmith White Rock

White Rock Locksmith Main: (604) 210-9875

Downtown Vancouver Locksmith: (604) 262-1907

Downtown Vancouver Keystore: (604) 669-8008

Mr. Locksmith Automotive Locksmith: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities

 

How To Separate Rental Car Keys #1| Mr. Locksmith blog

How To Separate Rental Car Keys #1| Mr. Locksmith blog

Mr. Locksmith (604) 259-2953

For further information go to Mr. Locksmith White Rock.

When you rent a car you usually give you two car keys/fobs crimped together on a metal wire. If you lose the keys you could be liable to replace not one but two keys and it could cost you $250-$700.

When I travel I usually have no tools, my Leather Man or Swiss Army knife (AirPort Security). A very simple method for breaking the crimped key chain wire is to just twist the two keys clockwise until either the cable or the crimp breaks.

Liked this video? Like, Share and Subscribe to Mr. Locksmith on YouTube.

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

Fast Facts Auto Book for Locksmiths | Mr. Locksmith Automotive Training

Fast Facts Auto Book for Locksmiths | Mr. Locksmith Automotive Training

For further information go to http://mrlocksmith.com/

One of my go-to books for making keys to cars and motorcycles is “2015 Edition FAST FACTS — 1965-2015 Auto’s and Cycles” by Robert G Sieveking from Sieveking Products Company. This is a great book. This is the 2015 version. Every two years, a new updated version comes out.

This is my go-to fast book when I’m talking to customers when I’m going out to the job, it has most if not all of the domestic automotive, five-ton trucks, highway trucks, and it also has extensive motorcycles. This is a fantastic book, I highly recommend it.

The “Helps Section” gives pointers and many specific transponder programming procedures that have been tested and proven in actual use. GM VATS system information, key progressions and special notes on a number of autos give you the benefit of nearly 40 years of “on the road” experience. The motorcycle index is the largest listing of 2-wheeled vehicles anywhere.

Fast Facts™ is the premier Locksmiths reference to foreign & domestic auto and motorcycle keys. Fast Facts™ is an encyclopedic listing of cars and motorcycles found in the North American Market from 1965 to present. In its 11th Edition (2010-15) the fast Facts™ book is a “Must-Have” item for all locksmiths that make keys for autos and motorcycles. Much expanded for 2015. There are now over 200 motorcycle key plates and 638 auto key plates. Many new or changed transponder Facts. The Index lists 3761 autos and over 1400 motorcycles.
Exclusive “Lay Flat” plastic spiral bound Desk Size is easier to use. When open, the book will not close like perfect bound books will do.
Fast Facts™ presents a Clear, Concise and Fully Indexed key making guide for autos and motorcycles. The NEW expanded motorcycle model index lists over 1400 motorcycle models, plus an additional 15 pages of Chinese and Korean motorcycles, scooters and handicap electric motorized chairs. Everything is at your fingertips. Fast Facts™ is clearly illustrated and fully indexed. Fast Facts contains more information than any other publication of its kind.

For further information go to Mr. Locksmith Automotive White Rock BC

I hoped you enjoyed watching this video. Subscribe to my YouTube channel.

 

If you need an extra Car, Truck or Motorcycle key call Randy at Mr. Locksmith Automotive (604) 259-7617 or email [email protected]

Mr. Locksmith White Rock

White Rock Locksmith Main: (604) 210-9875

Downtown Vancouver Locksmith: (604) 262-1907

Downtown Vancouver Keystore: (604) 669-8008

Mr. Locksmith Automotive: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

MVP PRO Auto Key Programmer Review | Mr. Locksmith Video

Automotive Locksmith MVP PRO Auto Key Programmer Review | Mr. Locksmith Video

For further information go to www.mrlocksmith.com

My daily Auto Key Programmer is the HotWire and the MVP Pro. I am on the unlimited token plan for both programmers. For the past 5+ years, I have been purchasing and testing “Offshore Auto Key Programmers.”

I have several Off Shore MVP clones. The price was so low, we keep on testing to see if any Off Shore Key Programmer could replace our existing programmers.

The MVP Clones are poorly made and no consistency or reliability with the software.

One Off Shore clone will program Ford and Chrysler but not Honda. Another identical clone will do Honda but not some Fords.
Another clone may work on a Nissan, but no one unit will do everything. It’s just been a zero.

So we kept on buying these, kept on testing them. Our dongles would break. The units would break. They’d fall apart. The software was inconsistent.

However, we found one clone that consistently worked well with Honda reflashes, specifically the 1998-2002 Honda Preludes.

In the early day we were just trying to save tokens, and really did we save any money? No, the clones were not good. There’s no consistency.

But again, if you don’t try, you don’t know. And there are some good units out there that the Chinese are coming out with now that are making some of the good stuff look bad.

Some of the new offshore auto key programmers they are using their own software, their own designs, and they are not clones or scammer units. Some of the Off Shore Key Programmers actually seem to be getting there.

Well, they’re coming out with nice updates on them, so they are becoming consistent.

The thing is with everything, you could have an Offshore made, really good programmer, and now they have counterfeit units of that that are total garbage.

So why are some of these Auto Key Programmers $300 and the other unit’s $50? The $50 unit is a total clone and it’s a total piece of garbage. How do you know? You don’t. That’s the big problem.

One way to find out is if you read the automotive forums.

Talk to other Locksmiths and view our videos.

The various plugins quality was all over the map. Some very good forums on Facebook, KeyPro website, ClearStar, etc.

So far, again, we’ve talked about this before, our go-to units are the MVP Pro and Hotwire.

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

 

So again, stay tuned for our other videos in the series. This is the MVP Pro. Thank you. I hope you enjoyed watching this video.

Subscribe to my channel.

If you need an extra Car, Truck or Motorcycle key call Randy at Mr. Locksmith Automotive (604) 259-7617 or email [email protected]

Mr. Locksmith White Rock

White Rock Locksmith Main: (604) 210-9875

Downtown Vancouver Locksmith: (604) 262-1907

Downtown Vancouver Keystore: (604) 669-8008

Mr. Locksmith Automotive Locksmith: (604) 259-7617

For On-line and Hands-on Locksmith Training Dates and Cities and automotive locksmith near you by Terry Whin-Yates for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/