Gun Safe Recalled Over Lock Failure

March 31, 2019 By

Gun Safe Recalled Over Lock Failure

For further info go to Mr. Locksmith White Rock.

A gun safe has been recalled because of a malfunction that allows it to be opened without a key or combination. The recall is for the Stack-On Sentinel model safe made by Alpha Guardian.

According to the Consumer Product and Safety Commission, a bolt malfunction can cause the safe to open without the use of a key combination. That lock failure allows access to any firearms stored inside, posing a safety hazard.

The black steel safe has the name “Sentinel” on it. The style number FSS18-64-MB-E-S can be found on the shipping packaging.

A gun safe sold at Dick’s Sporting Goods stores nationwide in November and December 2018 is being recalled due to an issue with the safe’s locking mechanism, the U.S. Consumer Product Safety Commission says.

Alpha Guardian has received one report of the safe opening without the use of a key or combination, which would mean someone could access the guns stored inside without authorization, the CPSC said.

The Consumer Product Safety Commission reported that Alpha Guardian has announced a recall on its Stack-On Gun Safes due to a possible bolt malfunction which could result in failure to lock and possible injury and said consumers should immediately stop using the safe and contact Alpha Guardian for information on receiving a replacement safe or a full refund.

The mishap causes the safe to open without a key or combination.

The style number is FSS18-64-MB-E-S and can be found on the shipping packaging.

The safes were sold at Dick’s Sporting Goods stores nationwide from November 2018 through December 2018 for about $700.

Consumers are asked to stop using the safes immediately and contact Alpha Guardian at 833-255-9827, at [email protected] or online for a full refund or replacement

Name of product: Stack-On Sentinel gun safe.
Hazard: A bolt malfunction can cause the safe to open without the use of a key or combination, allowing access to any firearms stored inside, posing an injury hazard.
Remedy: Refund, Replace
Recall date: March 21, 2019
Units: Approximately 1,250

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years experience in the locksmith and security industry and is a locksmith trainer providing On-LIne and Hands-On locksmith training to people, businesses and Law Enforcement all across North America and Asia. Terry Whin-Yates‘ BC Security License is B4227.

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith TrainingFor Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

About Terry Whin-Yates

Filed Under: Abloy, Antique Locks, Articles, automotive locksmith, Blog, Gun Safe Recalled Over Lock Failure, High Security Locks, Home Alarm, How To Become A Locksmith, Locksmith Training, Locksmith Videos, Making Picks, Mr. Locksmith, Mr. Locksmith Crescent Beach, Mr. Locksmith White Rock, Our Blog, Rekey Locks, Terry Whin-Yates, Top 10 Security, Top 10 Security Tips for Home Tagged With: , , , , , , , , , , , , , , , , , , ,

Best Locksmith Tweezers | Mr. Locksmith White Rock

March 10, 2019 By

Best Locksmith Tweezers | Mr. Locksmith White Rock

For further info and to purchase the Locksmith Tweezer go to Mr. Locksmith White Rock.

This is the best locksmith tweezer I have ever used and a “must have” for new and experienced locksmiths. The tweezers are made of stainless steel and the tip of the tweezer has been milled and has a grooved tip for fast and easy loading of cylinder pins. Straight and parallel blades provide ease for rekeying locks and top-pin loading,

Pinning Tweezers are a must have for gripping the small bottom pins, top pins, drivers and lock springs.

The Locksmith tweezers are made of stainless steel that will not bend or flex, these slim tweezers can help pinning lock driver pins from inside the lock. If you need to work with locks internal components this is the perfect tool for you or any locksmith or hobbyist.

Mr. Locksmith Tweezers are:
High Quality Brushed Stainless Steel
Length for Easy Handling
Grooved Tip Design for easy grasping of pins
Ribbed Sides prevent fingers slipping
Notch is Milled to a fine edge for Grasping Thin master pins
Locksmith Tools
Locksmith Tweezers for pinning locks
Locksmith Tweezer for rekeying locks

Mr. Locksmith Tweezers

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years experience in the locksmith and security industry and is a locksmith trainer providing locksmith training to people and businesses all across North America. Terry Whin-Yates‘ BC Security License is B4227.

 

 

 

 

Filed Under: 24 Hr Locksmith Service, Articles, Best Locksmith Tweezers, Blog, Locksmith Training, Locksmith Videos, Mr. Locksmith White Rock, Terry Whin-Yates Tagged With: , , , , , , , , ,

How to Pick Locks On-Line Course | Mr. Locksmith™

March 4, 2019 By

How to Pick Locks On-Line Course | Mr. Locksmith Blog

For further information go to http://www.mrlocksmithtraining.com/product/how-to-pick-locks-online-course/

I will teach you how to rekey and pick locks like a Professional Locksmith.

This is an On-Line Locksmith Class covering basic to advanced Lock Picking Methods and Techniques. Learning how to pick open locks starts with learning the basic to advanced methods of lock picking. The locksmith student will learn the various methods of picking open a lock. I have been teaching locksmith, military, police, law enforcement and Fire Departments for over 30 years how to pick open deadbolts, key-in-knob, padlocks, filing cabinets and “pick resistant” and “pick proof” locks. The lock picking class will cover the basic methods are as “Rake,” “Feel” and “Rake and Feel” lock picking methods to advanced lock picking techniques to open locks with mushroom, spool, and spiral pins and how to use bump keys.

On-Line “How to Pick Locks” will cover and discuss:

– Picking a lock
– Opening a lock with no keys
– Single pin picking, Feel Method, French Method
– Raking, Jiggling, Bumping, Scrubbing
– Can you lock even be picked?
– High-Security Locks
– Tubular, Ace, etc.
– The lock has malfunctioned.
– Reading Locks
– Buying Picks
– Making Picks
– Electronic Picks
– Pick Guns
– Methods of Entry
– Legal Issues
– Tools
– Preparation for Entry
– Setup your own Lock Practice Boards
– Automotive Lock Picking
– Other Lock Bypass Methods
– DAME (Defense Against Methods of Entry)
– Rekey Key in Knobs
– Shiming a lock
– Other methods to Open a lock

Coming Soon!

*How to use the brand new Lishi Kwikset and Schlage picks!!!

How to Pick Locks On-Line Course | Mr. Locksmith™

I am very happy to announce I have a new online course on how to pick locks. And it goes from the basic raking methods right up to the single pin picking or the field methods. So you can pick easily the Kwikset, the Weisers, the Schlage. You can learn how to do this.

I show you how to set up your practice pick boards using all the different picks. Also, I have all the newest electric pick guns.

I was just at Lishi, unveiling of the Kwikset Lishi picks. Those are going to be fantastic. They have a residential line that’s geared for Kwikset and Schlage, five and six pin.

The online course is good for locksmiths, Lock Sport, you get a good basic understanding here, and as well as we are going to be having more info for the police and the fire departments. I have been asked by a lot of fire departments to have more training for them.

This is going to be a great online course. I have over a dozen videos now. I have more videos being added to it all the time. So sign up now. I got a great introductory price for everybody. I look forward to hearing your comments.

 

Filed Under: 24 Hr Locksmith Service, 5.11 Best boots, Antique Locks, Articles, automotive locksmith, Blog, High Security Locks, How To Become A Locksmith, Locksmith Training, Locksmith Videos, Mr. Locksmith, Mr. Locksmith White Rock, Our Blog, Rekey Locks, Terry Whin-Yates, Top 10 Security Tips for Home, Top 3 Screwdrivers for Locksmiths Tagged With: , , , , , , , , , ,

Castration Rings for Locksmiths! Bump Keys! Mr. Locksmith Video

February 26, 2019 By

Castration Rings for Locksmiths! Bump Keys! Mr. Locksmith Video

For further info and to purchase Bump Keys go to Mr. Locksmith White Rock

Bump Keys: My Grandfather was a locksmith and he called it “Rapping a Cylinder” today we call it “Bumping a Lock” with “Bump Keys.”

When bumping a lock, the key is initially inserted into the keyway the “Castration Rings” helps to keep the Bump Key one notch (pin) short of full insertion.

Bump Keys Castration Rings

Bumping the key inward forces it deeper into the keyway. The bump key transmits a slight impact force to all of the key pins in the lock. The key pins transmit this force to the driver pins; the key pins stay in place.

The pin movements are highly elastic, the driver pins “jump” from the key pins for a nanosecond, moving higher than the cylinder (shear line of the tumbler), then are pushed normally back by the spring to sit against the key pins once again. Even though this separation only lasts only a nanosecond with a light rotational force or tension is continuously applied to the key during the slight impact, the cylinder will turn during the short separation time at the shear of the pins, and the lock can be opened while the driver pins are elevated above the shear line.

Lock bumping takes only an instant to open the lock. The lock is not visibly damaged, although the force of the bump can leave an indentation on the front of the cylinder.

Mr. Locksmith Bump Keys

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years experience in the locksmith and security industry and is a locksmith trainer providing locksmith training to people and businesses all across North America. Terry Whin-Yates‘ BC Security License is B4227.

 

 

 

Filed Under: 24 Hr Locksmith Service, Articles, Blog, Castration Rings for Locksmiths! Bump Keys!, Locksmith Training, Locksmith Videos, Mr. Locksmith, Mr. Locksmith White Rock, Terry Whin-Yates Tagged With: , , , , , , , ,

Teaching My Daughter How To Become A Locksmith – Take Your Kids To Work Day

February 12, 2019 By

Does your son or daughter want to become a locksmith? My daughter, Hazel is a highly intelligent girl with many skills so I asked my daughter Hazel to join me and learn skills such as how to pick a lock and how to cut a key for “Take Your Kids to Work Day.”

Picking a lock does require skill, but they are skills you can learn with practice. I do teach the same skills I’ve taught Hazel, and additional locksmithing skills over at my 1-day classes and 4-day classes available at MrLocksmithTraining.com.

What I find amusing is if a teenager is able to pick a lock in seconds with basic instructions, why do many locksmiths have issues with picking basic locks and go straight to drilling it? Locksmith training is available from myself at MrLocksmithTraining.com in Canada, the USA and Asia.

 

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years experience in the locksmith and security industry and is a locksmith trainer providing locksmith training to people and businesses all across North America. Terry Whin-Yates‘ BC Security License is B4227.

 

 

 

Filed Under: 24 Hr Locksmith Service, Articles, Blog, How To Become A Locksmith, Locksmith Training, Locksmith Videos, Mr. Locksmith White Rock, Terry Whin-Yates Tagged With: , , , ,

LAB DUR X Semi Pro 003 Pin Kit | Mr. Locksmith White Rock

January 26, 2019 By

LAB DUR X Semi Pro 003 Pin Kit | Mr. Locksmith White Rock

For more info and to purchase a Lab pin kit go to Mr. Locksmith White Rock

My favorite Lab pin kit for the locksmith service vehicle is the Lab Dur X Semi Pro Pin Kit. This Lab Pin kit is good for the beginner to advanced Locksmith and is great for Institutional locksmiths.

DUR-X Semi-Pro Universal Rekeying Kit .003 will rekey Kwikset, Schlage, Weiser, Yale, Arrow, Sargent, Weslock, Corbin, Russwin and most popular pin tumbler locks.

LDKU3
– .003 Increments
– 124 Pin sizes, 1 Spring size 115L
– Top/Master Pins sizes: .010 – .200
– Bottom sizes: .156 – .360

Description:
– Lightweight and made of super tough polyethylene
– Triple latches with double snap protection
– Center lid carrying handle
– Seal-Tight Lid prevents pins from mixing
– 50 pins per pocket, 100 springs per pocket
– Key slots for mounting to workbench
– Color Passport Pin Chart Pin sizes printed the same color as the Pins
– Dimensions: 22-1/2″ x 8-1/4″ x 3″

o purchase the LAB DUR X Semi Pro 003 Pin Kit click the following link.

My next most favorite Lab Pin Kit for my Tool Case which I take to every job site is the Lab Mini Universal .003. Click on the following link. LAB MINI UNIVERSAL PIN KIT.

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

About Terry Whin-Yates

Terry Whin-Yates is the president and CEO of Mr. Locksmith. Terry’s Grandad Frank, Dad (Brian) and Uncle Rob taught him how to be a locksmith and operate a locksmith business and most importantly, pick locks. Terry studied Criminology at Simon Fraser University. Today he lives in Vancouver and his children work in the business. Mr. Locksmith has several locksmith franchisees, all of whom are like extensions of the family business.

Terry Whin-Yates participates in locksmith podcasts, he writes blogs and posts locksmith videos on YouTube. Terry is engaged in the locksmith community and is actively working towards the improvement of the Locksmithing industry on a whole.

We at Mr. Locksmith encourage and endorse the proper regulation locksmiths in BC. We abide by all government licensing. All of our locksmiths are experienced, licensed, bonded and insured. Furthermore, all of our locksmiths are committed to providing the highest quality services. We are committed to producing the highest caliber locksmiths in all facets of the trade, including skill, knowledge, and adherence to ethics and regulation – and we are proud to say that our locksmiths will be the friendliest you will ever have to meet.

Recently, Terry Whin-Yates assisted CTV McLaughlin on Your Side team doing an Undercover investigation into locksmith pricing from unlicensed scammer locksmiths but also “bait and switch” tactics used by unscrupulous locksmiths. CTV “showed the website and rate sheet to master locksmith Terry Whin-Yates … to put the locksmith company to the test by installing a simple and easy to pick the residential lock on a condo door in Surrey.” Terry stated “It should have cost, by their rate sheet, it should have been $50. We charge and we tell people on the phone $95 to $150. That’s the cost to open your door.”

 

Filed Under: Articles, Blog, LAB DUR X Semi Pro 003 Pin Kit, Locksmith Videos, Mr. Locksmith, Safes, Terry Whin-Yates, Top Ten Security Tips Tagged With: , , , , , , , , ,

LAB Mini .003 Pin Kit | Mr. Locksmith White Rock

January 13, 2019 By

LAB Mini .003 Pin Kit | Mr. Locksmith New Westminster

For more info and to purchase a Lab pin kit go to Mr. Locksmith White Rock

My favorite Lab pin kit for my toolbox is the LAB Mini .003 Pin Kit. This Lab Pin kit is good for the beginner to advanced Locksmith and is great for Institutional locksmiths.

For more info and to purchase a Lab pin kit go to http://mrlocksmithtraining.com/

My favorite Lab pin kit for my toolbox. I have a large Lab Pin Kit in my Locksmith Service Vehicle and I carry the Lab Mini Kit to the job site for small rekeying jobs.

LAB Mini .003 Pin Kit Universal Rekeying Kit .003 will rekey Kwikset, Schlage, Weiser, Yale, Arrow, Sargent, Weslock, Corbin, Russwin and most popular pin tumbler locks.

Mini Universal Rekeying Kit .003 LMK003:
– .003 Increments
– 81 Sizes
– Masters: .024 – .090
– Drivers: .093 – .235
– Bottoms: .156 – .354
– 115L Cylinder Springs
– Pins per pocket (size dependent)
– Tops: 18 – 80 per pocket
– Bottoms: 18 – 35 per pocket

Mr. Locksmith Mini Lab Kit 003

Description:
– Solid metal construction. The most durable kit you can buy
– Seal-Tight Lid prevents pins from mixing
– Color Passport Pin Chart Pin sizes printed the same color as the Pins
– Dimensions: 8″x6″x11/16″

To purchase the LAB Mini .003 Pin Kit click the following link.

My next most favorite Lab Pin Kit for my Tool Case which I take to every job site is the Lab Mini Universal .003. Click on the following link. LAB MINI UNIVERSAL PIN KIT.

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years experience in the locksmith and security industry and is a locksmith trainer providing locksmith training to people and businesses all across North America. Terry Whin-Yates‘ BC Security License is B4227.

Filed Under: Articles, Blog, High Security Locks, LAB Mini .003 Pin Kit, Locksmith Training, Locksmith Videos, Mr. Locksmith White Rock, Our Blog, Terry Whin-Yates, Top 10 Security Tagged With: , , , , , , , , , , , , ,

LAB Pro Super Wedge Pin Kit .003 | Mr. Locksmith White Rock

December 26, 2018 By

LAB Pro Super Wedge Pin Kit .003 | Mr. Locksmith White Rock

For more info and to purchase a Lab pin kit go to Mr. Locksmith White Rock

I use this Lab Pin Kit for my Locksmith Shop and Hands-On Locksmith Training Class so people can refill their pin kits.

Super Wedge Pro Universal Rekeying Kits with drawer
– EPD003
– .003 Increments
– Accommodates 124 Pin sizes, 1 Spring size
– Top/Master Pins sizes: .010 – .200
– Bottom sizes: .156 – .360

Description:
– Large slide out tool drawer
– Special holder in tool drawer to accommodate the LAB Pin Block – – LBP001 (Sold Separately)
– Solid metal construction. The most durable kit you can buy
– Seal-Tight Lid prevents pins from mixing
– Dual-View Pin Tray
– Color Passport Pin Chart®
– Key slots for mounting to workbench
– 72 Pins Per Pocket
– 100 Springs 115L
– Dimensions: 21″ x 7-3/4″ x 4-1/2″ front x 5-3/4″ back

LAB Pro Super Wedge Universal Rekeying Kit .003 will rekey Kwikset, Schlage, Weiser, Yale, Arrow, Sargent, Weslock, Corbin, Russwin and most popular pin tumbler locks.

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training http://mrlocksmithtraining.com/

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

 

About Terry Whin-Yates

Terry Whin-Yates is the president and CEO of Mr. Locksmith. Terry’s Grandad Frank, Dad (Brian) and Uncle Rob taught him how to be a locksmith and operate a locksmith business and most importantly, pick locks. Terry studied Criminology at Simon Fraser University. Today he lives in Vancouver and his children work in the business. Mr. Locksmith has several locksmith franchisees, all of whom are like extensions of the family business.

Terry Whin-Yates participates in locksmith podcasts, he writes blogs and posts locksmith videos on YouTube. Terry is engaged in the locksmith community and is actively working towards the improvement of the Locksmithing industry on a whole.

We at Mr. Locksmith encourage and endorse the proper regulation locksmiths in BC. We abide by all government licensing. All of our locksmiths are experienced, licensed, bonded and insured. Furthermore, all of our locksmiths are committed to providing the highest quality services. We are committed to producing the highest caliber locksmiths in all facets of the trade, including skill, knowledge, and adherence to ethics and regulation – and we are proud to say that our locksmiths will be the friendliest you will ever have to meet.

Recently, Terry Whin-Yates assisted CTV McLaughlin on Your Side team doing an Undercover investigation into locksmith pricing from unlicensed scammer locksmiths but also “bait and switch” tactics used by unscrupulous locksmiths. CTV “showed the website and rate sheet to master locksmith Terry Whin-Yates … to put the locksmith company to the test by installing a simple and easy to pick the residential lock on a condo door in Surrey.” Terry stated “It should have cost, by their rate sheet, it should have been $50. We charge and we tell people on the phone $95 to $150. That’s the cost to open your door.”

Terry Whin-Yates is a 3rd Generation Locksmith with a BA (Hons) Criminology. He has 35 years experience in the locksmith and security industry and is a locksmith trainer providing locksmith training to people and businesses all across North America. Terry Whin-Yates‘ BC Security License is B4227.

https://mrlocksmithvancouver.com/about-terry-whin-yates/

Filed Under: automotive locksmith, Blogs, High Security Locks, LAB Pro Super Wedge Pin Kit .003, Locksmith Training, Locksmith Videos, Mr. Locksmith White Rock, Our Blog, Terry Whin-Yates, Top 10 Security Tagged With: , , , , , , ,

2019 Las Vegas Locksmith Training

November 2, 2018 By
All Hands-On Locksmith Training NOW FREE for new students
Have you ever wanted to know how to pick locks from a master locksmith? Looking for a career change or to advance your skills as a locksmith? We’ll teach you everything you need to know to be a successful locksmith.All of our hands-on locksmith training classes are included with an 18-month membership to our online courses.You can gain access to all you need to know for $1,500 USD.This includes ONE free hands-on locksmith training course a year.

Book your spot today!

Las Vegas Hands-On Locksmith Training

Want to join us at Club De Soleil Las Vegas for our 4-day hands-on locksmith training course? With every signup in the next 5 days, we will include a free set of premium grade lockpicks that we have manufactured.

Please contact Jonathan at [email protected] for more details.

Buy access to our online courses to obtain FREE access to our Las Vegas
hands-on classes

NOVEMBER 12-15 2018 Las Vegas Training Class

 2019 Las Vegas Training Dates
January 28-31, 2019 (10am – 3pm)
April 7-10, 2019 (10am – 3pm)September 16-19, 2019 (10am – 3pm)December 9-12, 2019 (10am – 3pm)

View our Las Vegas Training video 

As you probably know, we have released several training classes in Las Vegas, NV for November 2018 and many dates in 2019. Per high demand and popular request, these spots will go extremely quickly.

View the Las Vegas class schedule here

The online locksmith training course fee is deductible towards your licensing fee if you wish to become a part of Mr. Locksmith or Mr. ProLock.

We also have many franchise/licensing opportunities available in the USA and in Canada.

If you wish to become a franchisee/licensee, please visit this page and fill out the form here.

Franchise/licensing opportunities are available in almost every state/province. Contact Terry at 1-888-503-5003 for more information about business opportunities or email [email protected].

Terry Whin-Yates is a 3rd Generation Locksmith with over 30+ years of locksmithing experience and a BA (Hons) in Criminology. I will teach you how to rekey and pick locks like a Professional Locksmith. This is a Hands-On Locksmith Class covering basic to advanced Lock Picking Methods and Techniques. Learning how to pick open locks starts with learning the basic to advanced methods of lock picking. The locksmith student will learn the various methods of picking open a lock. I have been teaching locksmith, military and police for over 30 years how to pick open deadbolts, key-in-knob, padlocks, filing cabinets and “pick resistant” and “pick proof” locks. The lock picking class will cover the basic methods are as “Rake,” “Feel” and “Rake and Feel” lock picking methods to advanced lock picking techniques to open locks with mushroom, spool, and spiral pins. We will cover and discuss:

  • Rekey Deadbolt
  • Rekey Key in Knobs
  • Shiming a lock
  • Picking a lock
  • Opening a lock with no keys
  • Single pin picking, Feel Method, French Method
  • Raking, Jiggling, Bumping, Scrubbing
  • Can you lock even be picked?
  • High-Security Locks
  • Tubular, Ace, etc.
  • The lock has malfunctioned.
  • Reading
  • Buying Picks
  • Making Picks
  • Electronic Picks
  • Pick Guns
  • Methods of Entry
  • Legal Issues
  • Tactics
  • Tools
  • Preparation for Entry
  • Setup your own Lock Practice Boards
  • Automotive Lock Picking
  • Other Lock Bypass Methods
  • DAME (Defense Against Methods of Entry)
  • And lots more!

This class free for online locksmith training students from October 14, 2018 (NEW STUDENTS ONLY).

All Lock Picking Students will get access to my five (5) online video on Picking Locks, Using Plug Spinners, etc. and my new book. FREE for all students! As an added bonus you will get a copy of my new book “Penetration Expert: ”How to be a Professional Lock Picker” for FREE and access to Five (5) or my Private On-line Lock Picking Videos. Important Note: All students must pass a Criminal Records Check / Security Clearance from your local Police Force.

All past students will also receive a special bonus! I’ll also throw in a Lab Smart Wedge Universal Pin Kit (.003) a $200 value!

In addition, if you want to purchase lock picks and join the “Penetration Expert: Locksmiths Always Get In” Lock Picking Club you must pass a Criminal Records Check / Security Clearance.

Please click here for details and to purchase.
NOVEMBER 12-15 2018 Las Vegas Training Class

 2019 Las Vegas Training Dates

January 28-31, 2019 (10am – 3pm)

April 7-10, 2019 (10am – 3pm)

September 16-19, 2019 (10am – 3pm)

December 9-12, 2019 (10am – 3pm)

 

Filed Under: 24 Hr Locksmith Service, Articles, Blogs, High Security Locks, Locksmith Training, Locksmith Videos, Mr. Locksmith, Mr. Locksmith South Surrey, Mr. Locksmith White Rock, Our Blog, Schlage, Terry Whin-Yates, Top 10 Security Tagged With: , , , , ,

Oldest Lock and Door in Philippines | Mr. Locksmith Blog

August 19, 2018 By

Oldest Lock and Door in Philippines | Mr. Locksmith Blog

For further information go to Mr. Locksmith White Rock.

On a recent trip to the Philippines, I was able to see the Oldest Lock and Door in the Philippines.

Mr. Locksmith Terry Whin-Yates Oldest Lock in the Philippines

 

The oldest documented house in the Philippines was built between 1675 to 1730 and is located in Barangay Parian, Cebu City, Philippines.

Considered to be one of the oldest residential houses in the Philippines, the Yap-Sandiego Ancestral House was built sometime between 1675 and 1700. It was originally owned by a Chinese merchant named Don Juan Yap and his wife, Doña Maria Florido.

The materials used for the construction of the Yap-Sandiego Ancestral House were coral stones that were glued together with egg whites. The roof is made of “Tisa” clay which weighs 1 kilogram in each piece. The wooden parts were made of “balayong” and “tugas” (molave) are considered to be the hardest wood of all time.

The Lock is a very simple wooden construction but it does the trick to secure the door.

 

Mr. Locksmith Oldest Lock in the Philippines

 

Mr. Locksmith House in the Philippines

 

For On-line and Hands-on Locksmith Training Dates and Cities near you for Beginners, Intermediate, Advanced Locksmithing as well as my Covert Methods of Entry, Non-destructive Methods of Entry and to purchase the Famous “Dumb Key Force Tool” that opens Smart Key locks in seconds go to Mr. Locksmith Training

For Locksmith Franchise and Licensing Opportunities go to http://mrlocksmith.com/locksmithfranchise-opportunities/

Terry Whin-Yates is the Founder, President & CEO of Mr. Locksmith / Mr. Prolock.

Filed Under: 24 Hr Locksmith Service, Antique Locks, Articles, Blogs, Burglary Safe, Fire Safe, High Security Locks, Locksmith Training, Locksmith Videos, Mr. Locksmith, Mr. Locksmith Crescent Beach, Mr. Locksmith White Rock, Oldest Locks, Our Blog, Rekey Locks, Schlage, Terry Whin-Yates, Top 10 Security Tips for Home Tagged With: , , , , , , ,
« Previous Page
Next Page »